NOTE: The Air Compressor is equipped with an external overload device. Should the Air Compressor experience a short or excessive load, the overload device will trip and the machine will automatically shut down. If this happens, turn Off the Power Switch (A5), wait 10 minutes and check for any obvious problems. Reset the Overload Protection Button (41) then, turn On the Power Switch to restart the Air Compressor. See Drawing “A” below.
Assembly Drawing “A”
A2 | A3 |
|
|
| |
A10 | A5 | A9 |
|
(41) Overload
Protection
Button
A6
A7 (under the tank)
A1
A13
A11
A12
REV 02/07
SKU 94734 | For technical questions, please call | Page 10 |
