1.Check the oil level before each use. If the oil is low, add some. If it is high, drain some by removing the Drain Plug. Replace the oil once a year.
2.Check and clean the Air Filter
3.Drain the air tanks after each use by opening the drain petcock or the Tank Drain Valve
4.After the compressor has cooled down, clean it with a damp rag containing mild detergent and water. Do not use flammable liquids or solvents.
Parts List “A”
Item # | Description | Qty |
|
|
|
Compressor Assembly | 1 | |
|
|
|
Pressure Gauge | 1 | |
|
|
|
Rubber Grip | 1 | |
|
|
|
Safety Valve | 1 | |
|
|
|
ON/OFF Switch | 1 | |
|
|
|
Air Tank | 2 | |
|
|
|
Tank Drain Valve | 1 | |
|
|
|
Air Flow Valve | 1 | |
|
|
|
One Way Valve | 1 | |
|
|
|
Tube | 1 | |
|
|
|
Base | 1 | |
|
|
|
Rubber Foot | 1 | |
|
|
|
Bolt and Nut | 1 ea. | |
|
|
|
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94734 | For technical questions, please call | Page 9 |
