Harbor Freight Tools 94734 operating instructions REV 02/07

Models: 94734

1 14
Download 14 pages 7.27 Kb
Page 5
Image 5

3.Use eye and ear protection. Always wear ANSI-approved safety impact eye goggles, and ear plugs when using the Air Compressor.

4.Make sure all tools and equipment used with the Air Compressor are rated to the appropriate air pressure capacity of the Air Compressor. Do not use any tool or equipment that does not operate from 0-120 PSI. If necessary, check the owner’s manual of the tool or equipment for its air pressure rating.

5.Always disconnect the Air Compressor from its electrical outlet, release any remaining air pressure from the unit, and disconnect all pneumatic tools and equipment from the unit, before performing any services or maintenance, or when not in use.

6.Avoid injury. Never direct the air jet at people or animals.

7.Inspect safety valve daily. If the safety valve is not working properly, tank pressure can build up to dangerous levels. The tank could explode. For this reason, pull the ring on the safety valve before each use and verify that it operates freely. Replace safety valve if it does not operate freely.

Never remove or alter the factory sealed Safety Release Valve.

8.Do not attempt to readjust the automatic start and shutoff valves. Any change to the automatic ON/OFF pressure levels will cause additional stress on the motor, which may result in shortened motor life.

9.Drain the Air Compressor’s air tank every day. Do not allow moisture to build up inside the Air Tank.

10.Do not unscrew the tank drain valve so that more than four threads are showing.

11.Avoid risk of tank explosion.

a)Avoid weakening of tank by draining condensation after each use.

b)Never modify tank by drilling holes, welding to it, or modifying it’s parts.

c)The tank is designed, and factory set, to operate within a specific pressure range. For that reason, never make adjustments to, or substitute parts, to the compressor.

12.Avoid bodily injury from moving parts. The compressor cycles on automatically, without notice. For this reason, always keep hands and arms away from compressor parts when the unit is connected to electrical power. Always have compressor safety guards in place before turning compressor on.

13.Use approved air hose. Never use plastic or PVC pipe (unless specified for Air Compressors) to carry air under pressure. Regardless of its pressure rating, it can burst under pressure.

14.Never plug the power cord of this product into an electrical outlet while standing on a wet or damp surface.

15.THIS AIR COMPRESSOR MAY REQUIRE A DEDICATED ELECTRICAL CIRCUIT AS THE AMPERAGE DRAW UNDER FULL LOAD, COMBINED WITH USE OF ANY OTHER ITEM, MAY OVERLOAD YOUR CIRCUIT.

16.Always turn off the Air Compressor in the event of a power failure.

REV 02/07

SKU 94734

For technical questions, please call 1-800-444-3353.

Page 5

Page 5
Image 5
Harbor Freight Tools 94734 operating instructions REV 02/07