8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
9.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
10.Disconnect air supply. Unplug tool from air supply when not in use.
11.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before operation.
12.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
13.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.
14.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
15.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
16.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
17.Compressed air only. Never use combustible gas as a power source.
18.Protect hands and body from injuries. Always wear leather gloves and body protection when handling metal for use on the Planishing Hammer. Keep hands, fingers, and arms away from the hammer head and anvil during operation.
19.Install this product on a proper surface. Locate on a flat, level, and solid surface that is capable of supporting the weight of the Planishing Hammer and the material being hammered.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SKU 94847 | For technical questions, please call | Page |
