SPECIFICATIONS

 

 

Engine Specifications

1.5 HP / 52cc / Single Cylinder / 2-Stroke / Recoil Start

Fuel Required

25:1 Unleaded Gasoline (89 octane or better) & 2 Cycle Oil Mixture

Fuel Tank Capacity

0.26 Gallon

Recommended Gear Oil

SAE 80 – 90 Weight Gear Oil

Rotation

Single Rotation Only (Clockwise)

Drilling Speed

150 RPM

Maximum Drilling Depth

1’ 10”

Auger Diameter

4”

Overall Bit Length

2’ 6-3/4” Long

Cutting Edge Length

2’ Long

Drive Shaft

7/8” Diameter x 1-1/2” Long

Accessories

Auger Bit / Fuel & Oil Mixing Container / Spark Plug Wrench

 

Flat Head Screwdriver / Hex Keys (Qty. 2) / Storage Bag

Weight

17-1/4 lb. (without fuel and oil)

This product requires a 25:1 ratio of unleaded fuel and 2-cycle oil to be added to its fuel tank before starting. Attempting to start the Engine with an improper fuel mix, low or no fuel mix WILL ruin the Engine and void the warranty.

This product requires the proper amount of SAE 80-90 gear oil in its Gear Case before starting. Attempting to start the Auger Drill with low or no gear oil WILL ruin the Gear Case and void the warranty.

The Engine’s Carburetor may need to be adjusted by a qualified mechanic for ef- ficient high-altitude use.

The Emission Control System for this product’s engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual.

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

REV 07b, 07e

SKU 95346

For technical questions, please call 1-800-444-3353

PAGE 

Page 2
Image 2
Harbor Freight Tools 95346 warranty Specifications, Save this Manual, SKU For technical questions, please call