OPERATION
Starting and Stopping
1.
WARNING! Always wear safety equipment. When operating the Auger Drill, always wear
2.Place the Auger Drill on its side with its Auger (33a) resting upon the ground surface location that is to be drilled. Make sure that no debris, clothing, or other objects are near the auger bit. Keep all bystanders away.
PRIMER (95) | CHOKE (76) | |
FRAME (1b) | ||
|
STARTER
HANDLE
(7)
FIGURE C
3.Depress the Primer (95) three to four times. (See Figure C.)
4.Set the Choke (76) (See Figure C.) to the appropriate position: Closed if the Engine is cold.
Open if the Engine is warm.
5.Grip the Frame (1b) firmly with your left hand. Keep all body parts well away from the bit. Then, with your right hand, pull rapidly on the Starter Handle (7) to start the Engine. (See Figure C.)
SKU 95346 | For technical questions, please call | PAGE |
