Manuals / Harbor Freight Tools / Household Appliance / Water Pump

Harbor Freight Tools 95592, 95593 - 1.5 HP, 95591 - .75 HP See Table a, 25’ 50’ 75’

Models: 95592 - 1 HP 95591 - .75 HP 95593 - 1.5 HP 95592 95593 95591

1 14
Download 14 pages 9.23 Kb
Page 7
Image 7

2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See

Outlets for 2-Prong Plug.)

Extension Cords

1.Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.

2.As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using exten- sion cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and pos- sible tool damage.

(See Table A.)

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)

4.When using more than one exten- sion cord to make up the total length, make sure each cord contains at least the minimum wire size required.

(See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure the extension cord is prop- erly wired and in good electrical con-

dition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

EXTENSION CORD

 

LENGTH

 

AMPERES

 

 

25’

50’

75’

100’

150’

(at full load)

 

 

 

 

 

 

 

 

 

 

 

0 – 2.0

18

18

18

18

16

2.1

– 3.4

18

18

18

16

14

3.5

– 5.0

18

18

16

14

12

5.1

– 7.0

18

16

14

12

12

7.1 – 12.0

18

14

12

10

-

12.1

– 16.0

14

12

10

-

-

16.1

– 20.0

12

10

-

-

-

* Based on limiting the line

TABLE A voltage drop to five volts at 150% of the rated amperes.

Symbology

Double Insulated

 

Canadian Standards Association

 

 

 

Underwriters Laboratories, Inc.

 

 

V~

Volts Alternating Current

A

Amperes

 

 

 

n0 xxxx/min.

No Load Revolutions per Minute

(RPM)

SKU 95591/95592/95593

For technical questions, please call 1-800-444-3353

PAGE 7

Page 6 Page 8
Page 7
Image 7
Harbor Freight Tools 95593 - 1.5 HP, 95591 - .75 HP, 95592 - 1 HP operating instructions See Table a, 25’ 50’ 75’
Page 6 Page 8

95592 - 1 HP, 95591 - .75 HP, 95593 - 1.5 HP, 95592, 95593 specifications

Harbor Freight Tools is recognized for offering a diverse selection of high-quality tools at affordable prices. Among their popular products, the series of bench grinders, including models 95591, 95592, and 95593, stand out for their robust performance and reliability.

The model 95591, featuring a 0.75 HP motor, is ideal for light to moderate tasks. It comes with a 6-inch grinding wheel which is perfect for sharpening tools, shaping metal, and performing precise tasks, essential for those involved in carpentry or metalwork. It weighs approximately 31 pounds, providing stability during operation. The enclosed design helps to limit exposure to dust and debris while allowing for adequate ventilation, enhancing motor longevity.

The 95592 is a robust 1.5 HP bench grinder known for its power and durability. This model is equipped with larger 8-inch grinding wheels, making it suitable for heavy-duty applications. The higher horsepower allows for quicker grinding and shaping, which is particularly useful for professionals and serious hobbyists. With a sturdy construction, it ensures minimal vibration during use, resulting in more accurate grinding.

Similarly, the model 95593 features a dual-wheel design, allowing users to switch between different grinding wheels depending on the task at hand. This versatility makes it a popular choice for those who require different grits for varied applications. Its powerful 1.5 HP motor ensures that it can tackle even the toughest materials efficiently.

All models in this series come equipped with features such as adjustable tool rests, which enhance precision by allowing users to set the angle of the tool they are grinding. Eye shields provide safety against flying debris while allowing a clear view of the grinding surface. Furthermore, their heavy-duty construction ensures that they withstand the rigors of daily use.

In summary, Harbor Freight's 95591, 95592, and 95593 bench grinders are excellent choices for users seeking both power and precision. Whether for light hobby use or more demanding professional tasks, these models offer exceptional value while incorporating technologies that ensure durability, safety, and efficiency in any workspace.