Harbor Freight Tools 95591 - .75 HP, 95592, 95593 - 1.5 HP Specific Safety Rules, Service

4. Maintain a safe environment. Keep the area well lit. Make sure there is adequate surrounding space. Always keep the area free of obstructions, grease, oil, trash, and other debris. Do not use an electrically powered product in areas near flammable chemicals, dusts, and vapors.

				information. If unreadable or miss-
		TOOL USE AND CARE
1. Disconnect the Power Cord Plug				ing, contact Harbor Freight Tools for a
				replacement.
	from the power source before
	making any adjustments, changing		2.	Wear ANSI-approved
	accessories, or storing the Sump			safety impact eye gog-
	Pump. Such preventive safety mea-			gles when assembling
	sures reduce the risk of starting the			the Pump. Using per-
	unit accidentally.			sonal safety devices reduce the risk
2.	Store idle equipment out of reach			for injury. Safety impact eye goggles
				are available from Harbor Freight
	of children and other untrained
				Tools.
	persons. Electrically-powered prod-
	ucts are dangerous in the hands of		3.	Use the right product for the job.
	untrained users.			There are certain applications for
3.	Check for misalignment or binding			which this product was designed. Do
				not use small tools, attachments, or
	of moving parts, breakage of parts,

and any other condition that may	equipment to do the work of larger in-
	dustrial tools, attachments, or equip-
affect this product’s operation. If
	ment.
damaged, have the Sump Pump
serviced before using. Many ac-
cidents are caused by poorly main-
tained equipment.

SERVICE

1.Service must be performed only by qualified repair personnel. Service

or maintenance performed by unqual- ified personnel could result in a risk of 5. injury.

2.When servicing this product, use only identical replacement parts. Follow instructions in the “Inspec- tion, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

1.Maintain labels and nameplates on the Pump. These carry important

Risk of electrical shock. Always disconnect the Pump from its power source before handling or

making any adjustments to the tool. Always wear non-skid rubber boots when water is on the floor and you must unplug the Pump. Make sure the electrical power source is a sepa- rately fused, grounded, 3-wire type GFCI (Ground Fault Circuit Interrupt- er) outlet. Do not remove the ground prong on the Power Cord Plug. Do not use an extension cord.

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 4