6.Carefully set the Pump in place. Do not lower or raise the Pump by the Power

Cord or Discharge Pipe. (See Figure E.)

7.The Float Switch (2) automatically switches on and off at a water depth of approxi- mately 4 inches. The ON/OFF height can be manually changed by adjusting the Float Switch Lock. CAUTION: Do not run the Pump dry. Doing so will increase wear to the unit and possibly cause seal damage. (See Figure E.)

Note: This Pump has a built-in thermal protector for the Motor which automatically shuts it off to avoid overheating. After the Motor cools, it will cycle back on. Wait for the cycle to continue. Do not try to turn on the Pump manually after it has auto- matically shut off.

8.Connect additional Discharge Pipe as needed to direct the water discharge to the desired location. The discharge should be kept as short as possible with a minimum number of turns. IMPORTANT: Do not exceed the maximum lift of the Pump:

Model 95591 = 20 Feet. Model 95592 = 24 Feet. Model 95593 = 26 Feet.

9.Connect the Power Cord & Plug to its 115 volt, GFCI electrical outlet, while making sure to form a “drip loop” in the Power Cord. (See Drip Loop, page 5.)

10.When the water level exceeds approximately 4 inches the Pump will automatically turn on and run continuously until the water level falls below 4 inches at which time the Pump will automatically turn off.

11.WARNING! When shutting off power to the Pump, always shut off the electrical power to the GFCI outlet first. Then, disconnect the Pump’s Power Cord & Plug from the GFCI outlet.

INSPECTION, MAINTENANCE, AND CLEANING

WARNING! Always shut off the electrical power to the GFCI outlet first. Then, dis- connect the Pump’s Power Cord & Plug from the GFCI outlet prior to performing any inspection, maintenance, or cleaning procedures.

1.Before each use, inspect the general condition of the Pump. Check for cracked or broken parts, damaged electrical wiring, clogged Impeller Cover, Impeller, Dis- charge Pipes, and any other condition that may affect safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

SKU 95591/95592/95593

For technical questions, please call 1-800-444-3353

PAGE 10

Page 9 Page 11
Page 10
Image 10
Harbor Freight Tools 95591 - .75 HP, 95593, 95592 INSPECTION, MAINTENANCE, and Cleaning, Do not use damaged equipment
Page 9 Page 11

95592 - 1 HP, 95591 - .75 HP, 95593 - 1.5 HP, 95592, 95593 specifications

Harbor Freight Tools is recognized for offering a diverse selection of high-quality tools at affordable prices. Among their popular products, the series of bench grinders, including models 95591, 95592, and 95593, stand out for their robust performance and reliability.

The model 95591, featuring a 0.75 HP motor, is ideal for light to moderate tasks. It comes with a 6-inch grinding wheel which is perfect for sharpening tools, shaping metal, and performing precise tasks, essential for those involved in carpentry or metalwork. It weighs approximately 31 pounds, providing stability during operation. The enclosed design helps to limit exposure to dust and debris while allowing for adequate ventilation, enhancing motor longevity.

The 95592 is a robust 1.5 HP bench grinder known for its power and durability. This model is equipped with larger 8-inch grinding wheels, making it suitable for heavy-duty applications. The higher horsepower allows for quicker grinding and shaping, which is particularly useful for professionals and serious hobbyists. With a sturdy construction, it ensures minimal vibration during use, resulting in more accurate grinding.

Similarly, the model 95593 features a dual-wheel design, allowing users to switch between different grinding wheels depending on the task at hand. This versatility makes it a popular choice for those who require different grits for varied applications. Its powerful 1.5 HP motor ensures that it can tackle even the toughest materials efficiently.

All models in this series come equipped with features such as adjustable tool rests, which enhance precision by allowing users to set the angle of the tool they are grinding. Eye shields provide safety against flying debris while allowing a clear view of the grinding surface. Furthermore, their heavy-duty construction ensures that they withstand the rigors of daily use.

In summary, Harbor Freight's 95591, 95592, and 95593 bench grinders are excellent choices for users seeking both power and precision. Whether for light hobby use or more demanding professional tasks, these models offer exceptional value while incorporating technologies that ensure durability, safety, and efficiency in any workspace.
Top Page Image Contents