19.Not For Extended Use. Only use this Heater for 15 to 20 minutes at a time.
20.Place the Heater in the proper location. Set up the Heater in a level location that allows at least 2 inches of air space around the sides of the unit. Make sure nothing comes in contact with the Heater. Do not operate in close proximity to liquid.
21.Check vehicle manual to ensure the vehicle lighter socket is 15 amps or greater. Do not use a socket extension or pigtail to operate this heater.
22.Do not overload the lighter socket by operating multiple appliances at the same time.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Assembly Instructions
1.
WARNING! Make sure the On/Off Switch of the Heater/Fan is in its “OFF” posi- tion and that it is unplugged from its electrical outlet before making any adjustments to it.
2.Your 12V Rubberized Heater/Fan comes completely assembled. Instructions on replacing the Fuse and installing the Heater/Fan (optional) are outlined below.
Replacing the Fuse
Fuse Holder (18)
Figure 1
1.If the Heater Fan fails to operate when plugged into the cigarette lighter adapter receptacle, check to see if the Fuse (12) should be changed. If the fuse for heater is useable, check the fuse on your vehicle for the lighter socket and change if nec- essary. Replace fuses with only same type and rating.
SKU 96144 | For technical questions, please call | Page 4 |
