Figure for Bar Connection (Steps 15-19)
to the ground. Use the two remaining Stakes to secure the door flap.
Maintenance And
Servicing
1. Periodically, inspect the general con- dition of the product. Check for loose screws cracked or broken parts, and any other condition that may affect its safe operation. If any defects are found have them repaired or the parts replaced immediately.
2. Clean external surfaces of the prod- uct with clean, moist cloth.
15.Find the holes in the Bars (I, J) and line them up with the holes in the Poles (G, H).
16.Secure the Bars (I, J) to the Poles (G, H) using four Screws (R) per Bar. The Screws will be threaded directly through the cloth surrounding the Bars.
17.Choose an area for the Greenhouse that is flat, level and free of debris. If possible place the Greenhouse in an area that is sheltered from the wind. High winds can tear the Greenhouse loose from the Stakes (N) and could result in property damage or personal injury. In case of severe weather, take the Greenhouse apart.
18.Examine the area where the Green- house is to be placed. Make sure there are no utility lines beneath the surface that might be damaged by the Stakes.
19.Hammer the Stakes (N) into each corner of the Greenhouse to secure it
SKU 97439 | For technical questions, please call | Page 6 |
