Harbor Freight Tools 99621 Maintenance And Servicing, Cleaning, Maintenance, and Lubrication

9.Empty the Hopper Assembly and re-weigh the material. By taking note of how much material you used and how wide the spreading area was, you can figure the correct rate of spread. This will help you maintain the correct spreading rate for your project.

10.To prevent accidents, turn off the ATV and disconnect the ATV Spreader after use. Clean, then store indoors out of children’s reach.

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Turn the Power Switch of the vehicle to its “OFF” position before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and

Lubrication

1.BEFORE EACH USE, inspect the general condition of the ATV Spread-

er. Check for loose screws, misalign- ment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condi- tion that may affect its safe operation.

2.After Use, clean external surfaces with clean, moist cloth.

3.Clean out the Hopper Assembly and using a shop vacuum (not supplied), clear all leftover material from the Turning Plate (16) and other areas of the Spreader.

4.Rinse the ATV Spreader with a hose and fresh clear water. Let dry before storing indoors away from children.

5.NOTE: If the ATV Spreader is to be left outside between jobs, always cover with the Rain Cover (1) to protect both the Spreader and any material that may be in the Hopper Assembly (8).

PLEASE READ THE FOLLOWING

CAREFULLY

The manufacturer and/or distributor has provided the parts listandassembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states thatall repairsand parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liabilityarising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

SKU 99621 For technical questions, please call 1-800-444-3353. Page 6