Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Control Handle will | 1. | Material clogging port of Gauge | 1. | Check both Gauge Assembly (22) |
not open/close Gauge |
| Assembly (22) and/or Adjustment |
| and Adjustment Plate (13) and clear |
Assembly. |
| Plate (13). |
| debris if necessary. |
Material not spreading | 1. | Wrong opening on Gauge Assembly | 1. | Loosen Thumb Wing Nut (24) and |
at proper rate. |
| (22). |
| open/close accordingly and re- |
|
|
|
| adjust if necessary. |
Follow all safety precautions whenever diagnosing or servicing the appliance. Turn off ATV and remove Spreader from vehicle before service.
PARTS LIST
Part # | Description | Q’ty | Part # | Description |
1 | Rain Cover | 1 | 20 | Hex Bolt M6X30 |
2 | Electric Motor Lid | 1 | 21 | Frame Rail |
3 | Electric Motor | 1 | 22 | Gauge Assembly |
4 | Electric Motor Cover | 1 | 23 | Spacer |
5 | Tie | 1 | 24 | Thumb Wing Nut M6 |
6 | Unlock Nut | 2 | 25 | Control Handle |
7 | Motor Support | 1 | 26 | Wire Adjustment Clip B |
8 | Hopper Assembly | 1 | 27 | Wood Screw M4.5X18 |
9 | Flat Washer | 4 | 28 | Adjustment Wire |
10 | Hex Bolt M6X15 | 2 | 29 | Phillips Screw M6X15 |
11 | Wire Clamp | 1 | 30 | Lock Washer |
12 | Wire Adjustment Clip A | 1 | 31 | Switch Box Assembly |
13 | Adjustment Plate | 1 | Fuse | |
14 | Screw M5X35 | 4 | Switch | |
15 | Center Spacer | 1 | ATV Battery Terminals | |
16 | Turning Plate | 1 | Motor Terminal | |
17 | Wood Screw M4.5X10 | 3 | 32 | Hex Nut M6 |
18 | Phillips Screw M4X20 | 1 | 33 | Press Plate |
19 | Phillips Screws M6X45 | 1 | 34 |
Q’ty
1
2
1
1
2
1
1
2
1
2
2
1
1
1
1
1
8
4
8
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts.
