Harman 160A Specifications, Output XLR, Dynamic Range, Gain Adjustment Range, Threshold Range

dbx 160A COMPRESSOR / LIMITER

SPECIFICATIONS

Input (1/4” TRS Phone and XLR)	Floating Balanced; XLR: Pin 2 Hot, Phone: Tip Hot
Impedance	100kΩ balanced, 50kΩ unbalanced
Maximum Level	+24dBu, Balanced or Unbalanced
CMRR	>45dB (any frequency)
Detector Input (1/4” TRS Phone)	Floating Balanced
Impedance	400kΩ balanced, 200kΩ unbalanced
Maximum Level	+28dBu, Balanced or Unbalanced
Output (XLR)	Floating Balanced; Pin 2 Hot
Impedance	30Ω
Maximum Level (Balanced)	+ 24dBm; <0.3% THD
Maximum Level (Unbalanced)	+20dBm; <0.3% THD
Noise	<-90dBu, Unweighted (20Hz - 20kHz)
Frequency Response	20Hz - 20kHz, + 0, -0.5dB; +0, -3dB 0.5Hz and 90kHz
THD+N	<0.2%, Typical, Any Amount of Compression up to 40dB @ 1kHz
Output ( 1/4” TRS Phone)
Balancing	Unbalanced
Impedance	20Ω
Maximum Level	+24dBm
Dynamic Range	>113dB
Gain Adjustment Range	Variable from -20dB to +20dB
Threshold Range	-40dBu to +20dBu
Threshold Characteristic	Selectable OverEasy® or Hard Knee
Compression Ratio	Variable 1:1 to ∞:1 thru to -1:1; >60dB Maximum Compression
Attack Time	Program-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms
	for 30dB
Release Time	Program-Dependent; Typically 8ms for 1dB, 80ms for 10dB,
	400ms for 50dB; 125dB/Sec Rate
Stereo Coupling	True Power Summing; 1/4” TRS Phone Jack; 160A only
Power Cord	IEC-Type Connector
Operating Voltage	100-120VAC or 220-240VAC
Operating Temperature	50/60Hz or 120V 60Hz
	0°C to 35°C (32°F to 95°F)
Dimensions (H x W x D)	1.75” x 19” x 6.5” (4.45cm x 48.2cm x 16.51cm)
Rack Space	1 Rack Unit (1U High)
Weight	Net Weight: 4.42 lbs (2.00 kg)
	Shipping Weight: 6.62 lbs (2.99 kg)

14

Notes: Noise and frequency response specifications are at unity gain. 0dBV=1.0Vrms; 0dBu=0.775Vrms

Specifications are subject to change