To delete a programmed or learned code:
1.Access the remote’s menu system by pressing and holding the AVR Settings Button for 3 seconds, until the “Main Menu” and “Program Device” messages appear in the LCD Display.
2.Use the KL Buttons to select “Learn” from the remote’s main menu, and press the OK Button.
3.When the “Learn Menu” message appears in the upper line of the LCD Display, scroll to the “Learn Delete” option, and press the OK Button.
4.The Learn Delete menu offers the options of deleting a single learned key code, an entire device or all devices. Scroll to the desired option and press the OK Button.
•• To delete an individual key code, the remote will first prompt you to select the device containing the key code, then prompt you to press the key. It will confirm the deletion, then offer you the opportunity to delete another learned key or exit the delete key function.
•• To delete an entire device, the remote will prompt you to select the device. When you scroll to the device and press the OK Button, the remote will confirm the deletion and exit its programming mode, returning to normal operation.
•• To delete all devices, wait a few moments while the remote deletes all programmed device codes. It will then return to normal operation.
To rename a key or device:
If you wish to change the name of a device or key as it appears in the LCD Display, follow these steps:
1.Access the remote’s menu system by pressing and holding the AVR Settings Button for 3 seconds, until the “Main Menu” and “Program Device” messages appear in the LCD Display.
2.Use the KL Buttons to select “Rename” and press the OK Button.
3.Use the KL Buttons to select whether to rename a device or a key, and press the OK Button.
4.Use the KL Buttons to select the device, either to rename the device itself or a key function used by that device, and press the OK Button.
5.The current name of the device or key will appear on the lower line of the LCD Display, with the cursor at the end of the line.
Use the M Button to move the cursor to the beginning of the name, then type over the current name using the Alphanumeric Keys.
Each Alphanumeric Key has the characters available in addition to its number printed above the key. Each press of the key scrolls through the available characters. To move to the next character, either press the N Button or press the next desired Alphanumeric Key.
Press the OK Button to finish, and the remote will prompt you to rename another key or device, or to exit.
INSTALLATION
STEP FIFTEEN – Turn On the AVR 760/AVR 660
Two steps are required the first time you turn on the AVR 760/AVR 660.
1.Flip down the
2.There are several ways to turn on the AVR from Standby mode.
a)Press the Standby/On Switch on the front panel.
b)Using the remote, press the AVR Power On Button or any of the Source Selectors.
NOTES:
•• Any time you press one of the Source Selectors on the remote, the remote will switch device modes. To control the receiver, press the AVR Settings Button. Some AVR functions are available in all device modes: Volume Controls (including Mute), Audio Effects, Video Modes, Surround Modes, AVR Settings, Info Settings, Sleep Settings and AVR Power On and Off.
•• If you do not see a picture within about 1 minute, refer to the Video Troubleshooting Tips on page 31.
ENGLISH
25
