Harman-Kardon HD 970 owner manual Repeat Play Operation

Repeat Play Operation

Repeat Play

The HD 970’s programming system enables you to repeat either a single track, the entire disc (respectively all programmed tracks) or a special- ly programmed passage that you select.

Repeat One Track

To repeat the track in play, press the Repeat button 5once.The REPEAT and 1 indicators will light and the track will continue to play over and over again continuously. If the track is changed by pressing the Skip buttons 78

7while the Repeat function is in use, the newly selected track will be played normally. To stop the repeat play, press the Stop button 6 Aor press the Repeat button 5until the REPEAT indicator goes out.

Repeat All Tracks

To repeat all of the tracks on a disc during play mode, press the Repeat button 5until the REPEAT and ALL indicators light up. When you see these indicators, the entire disc or all pro- grammed tracks will play through to the end, and then start again from the beginning. The disc will play continually until the Stop button 6Ais pressed.

Repeat A–B

The CD player may be programmed to repeat any section within a track, or a complete pas- sage or program that includes material in a series of tracks.

To program the unit for A–B play, first locate the point on the disc where you wish to begin the repeated section. At that point, press the Repeat A–B button 6. The REPEAT indicators will light in the Information Display and an

A– indicator to show that the program process has started. Let the disc continue to play or press the Search —button 788or Skip fl·button 787on the front or remote until you have reached the end of the section to be repeated. When the end point is reached, press the Repeat A–Bbutton 6 again. Note that the REPEAT and A–Bindicators will now be illuminated.

Once the Repeat A–Bbutton 6is pressed for the second time to complete the program- ming, the CD player will automatically go to the beginning of the selected passage and continue to play the section over and over.

To resume normal play press the Repeat A–Bbutton 6again. The REPEAT and A–Bindica- tors will go out, and the rest of the disc will play normally.

IMPORTANT Note: Tracks programmed as described before in chapter ”Programmed Play” can be repeated too: When you press Repeat

5once after a program is created (the PROGRAM indicator must be lit, otherwise press Program) and the program is played, the REPEAT 1 indicator will light and the track cur- rently playing will be repeated continuously. If Repeat is pressed twice REPEAT ALL will be dis- played, all programmed tracks will be played subsequently and the sequence will be repeated continuously until Stop is pressed.

14REPEAT PLAY OPERATION