Harman-Kardon SB15/230 manual To program the power command, To program the mute command

Programming the Soundbar to Respond to Your TV Remote

You can program the soundbar so it will respond to your TV remote’s Power, Mute, Volume Up, Volume Down and Source commands.. This lets you control your whole home theater system with a single remote.. Before beginning to program the soundbar, have your TV remote handy.. We recommend sitting down in front of the soundbar.. The steps will time-out, so read through the entire procedure before you begin..

To program the power command:

1.With the soundbar turned on, hold down the soundbar’s Power and Source Selector (SRC) buttons together until all the soundbar button indicators flash.. This enters the learning mode..

Hold down

both buttons until all indicators flash

2. Momentarily press the soundbar’s Power button.. It will turn amber..

Momentarily

press

3.Aim the TV remote at the front of the soundbar from about 300mm-900mm (about 12-36 inches) away..

300mm-900mm

12"-36"

TV

Remote

4.Hold down the TV remote's Power button for one second, then release it.. Do this a total of four (4) times.. When the soundbar has learned the power command, its Power Indicator will turn blue, and the Surround Mode and Source Selector Indicators will flash blue..

•• If the Power Indicator flashes amber, the procedure failed.. Repeat Steps 1 – 4..

To program the source, volume + and volume – commands:

Follow Steps 1–4 as above, but in Steps 2 and 4, substitute the soundbar and TV remote’s Source Selector and Volume Up/Down buttons for the Power buttons..

To program the mute command:

Follow Steps 1-4 as above, but in Step 2, hold down the soundbar's Power button for 2-3 seconds.. In step 4, substitute the TV remote's Mute button for its Power button..

To erase all remote programming:

Hold down the soundbar's Surround Mode and Volume Up buttons at the same time for 2-3 seconds..

10