Connections
Source Connections
Analog: Use the supplied stereo audio cable to connect the soundbar’s Source 1 (analog) input to your TV’s stereo audio output.. If your TV has two sets of audio output jacks, use the set that has a fixed (not variable) output level.. This will let you turn your TV’s speakers all the way off while the TV still supplies a constant audio signal to the soundbar..
Digital: If your DVD player, cable tuner or satellite tuner has a coaxial digital output, you can use a coaxial digital audio cable (not supplied) to connect it to the soundbar’s Source 2 (digital) input..
NOTE: If your DVD player, cable tuner or satellite tuner does not have a coaxial digital output, you can connect its analog audio output to your TV.. The TV will send its audio signal to the soundbar through the analog connection described above..
AUDIO
OUT
TV
Stereo Audio Cable (supplied)
SB15CNTR Soundbar
Coaxial Digital Audio Cable
(not supplied)
ENGLISH
DVD Player
COAXIAL
DIGITAL
OUT
Power Connections
After you have made and verified all of the source connections above:
1.Connect the DC power supply to the soundbar’s power connection.. Then plug the supplied AC cord into the DC power supply and into an active, unswitched AC outlet.. DO NOT plug this cord into the accessory outlets found on some audio components..
2.Plug the subwoofer’s power cord into an active, unswitched AC outlet.. DO NOT plug this cord into the accessory outlets found on some audio components..
Power
Connection
SB15CNTR
Rear Panel
AC Power Cord
Power Supply
7