![Subwoofer Rear-Panel Controls](/images/new-backgrounds/13837/138379x1.webp)
Subwoofer Rear-Panel Controls
ENGLISH
CROSSOVER
Crossover
Knob
VOLUME
Volume
Knob
MIN MAX
0
PHASE
180
Phase
Switch
Wireless
Code
Switch
| POWER | AC |
|
| |
ON |
| Fuse |
|
| |
OFF |
|
|
|
| Power |
|
| Cord |
|
| Power |
|
| Switch |
Crossover Knob: This knob adjusts the subwoofer’s crossover between 50Hz and 150Hz..The higher you set the Crossover knob, the higher in frequency the subwoofer will operate and the more its bass will “overlap” that of the soundbar.. This adjustment helps achieve a smooth transition of bass frequencies between the subwoofer and the soundbar for a variety of different rooms and subwoofer locations.. See Subwoofer Crossover Knob, on page 9, for more information..
Volume Control: Use this control to balance the subwoofer’s volume with that of the soundbar.. Turn the knob clockwise to increase the subwoofer’s volume; turn it counterclockwise to decrease the subwoofer’s volume..
Phase Switch: This switch determines whether the subwoofer driver’s piston- like action moves in and out in phase with the speakers in the soundbar.. If the subwoofer were to play out of phase with the soundbar speakers, some of the sound waves produced by the subwoofer or soundbar could be canceled, reducing bass performance and sonic impact.. This phenomenon depends in part on the relative placement of the speakers in the room.. See Subwoofer Phase Switch, on page 9, for more information..
Wireless Code Switch: Selects between four different channels for the wireless
subwoofer signal.. IMPORTANT: Be sure to set the soundbar’s Wireless Code switch to the same channel as you set the subwoofer’s Wireless Code switch.. See Wireless Code Switches, on page 9, for more information..
AC Fuse: The SB 15SUB is
1.Unplug the power cord from the wall..
2.Use a screwdriver to remove the blown fuse..
3.Replace the fuse with an identical T1AL/250V 1A – 250V AC fuse..
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE, REPLACE THE FUSE ONLY WITH THE SAME TYPE AND RATING..
Power Cord: Plug this cord into an active, unswitched AC outlet.. See Power Connections, on page 7, for more information..
Power Switch: Set this switch to the On position to activate the subwoofer.. In normal operation, this switch will be left in the On position.. See Turning the Subwoofer On and Off, on page 8, for more information..
Status Indicator (on top of unit, not shown): Lights blue when the subwoofer's power switch is in the On position; lights amber when the subwoofer is in Standby; turns off when the subwoofer’s Power switch is in the Off position..
5