Harman Stove Company P61-2 manual Soot and Fly Ash

Maintenance

Fig. 26	Fig. 27
Latch "closed "with	Latch "open "with
blower cover in place.	blower cover partly
Burn pot clean-out is	removed. Burn pot
closed.	clean-out is open.

ESP probe

	Fig. 28
Exposed blower wheel		Blower cover
and flue opening,		removed.
NOTE: ESP probe is
visible.

ESP Probe

7.Open burn pot slide as shown, clean with vacuum and close.

8.Clean heat exchanger with scraper as shown at left.

9.Brush or scrape the inside of the stove to remove fly ash.

10.Scrape burnpot with flat end of scraper pro- vided with the stove. Fig.31.

11.Slide ash pan into stove and latch into place.

Brush not supplied. Can be found in hardware stores.

Fig. 30

Soot and Fly Ash

The products of combustion will contain small particles of fly ash. The fly ash will collect in the exhaust venting system and restrict the flow of the flue gases. Incom- plete combustion, such as occurs during startup, shutdown, or incorrect operation

of the room heater, will lead to some soot formation which will collect in the exhaust venting system. The exhaust venting system should be inspected at least once every year to determine

if cleaning is necessary.

Fig. 29

Be careful not to damage ESP probe when cleaning with brush.

Fig. 31

17