Section 1 - Unpacking the Lift

Your Fully Powered Inside Lift was factory pre-assembled to require little assembly before installation.

AL200 / AL400 Box contents should include:

Package Check List

Lifting Arm (# 1)

Standard Post (# 2)

Base (# 3)

Strap & Hook Assembly (# 4,5,6)

Leg Extensions (#9)

Figure 1.1

AL200 Universal Inside Lift

#1

#4,5,6

#2

#3

#7

Hardware Package

Contents include:

Vehicle Wiring Harness (# 7)

Hand Control (#8)

3- Installation Washers Required Fasteners Black zip ties

Figure 1.2

AL400 Fully Powered Lift

1

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4,5,6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

Figure 1.3

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AL055 Economy Lift

 

 

 

 

 

 

 

 

 

Package Check List

 

 

Hardware Package

Lifting Arm (# 1)

 

 

Contents include:

Post (# 2)

 

 

Vehicle Wiring Harness (# 7)

Base (# 3)

 

 

Switch Harness (#8)

Strap & Hook Assembly

 

 

3 - Installation Washers

(# 4,5,6)

 

 

 

 

 

Required Fasteners

 

 

 

 

 

 

Black zip ties

#8

Be sure and check the contents of the box against the package check list to be sure that all parts are included with the lift that are required for proper installation. If any parts are missing or if any damage is noted, immediately contact the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or dam- aged parts.

2

Page 2
Image 2
Harmar Mobility AL400, AL055 manual Unpacking the Lift, Package Check List, AL200 Universal Inside Lift, Hardware Package