Hatco IMPERIAL "S manual Accessories, Stainless Steel Adjustable Legs, Floor Mounting Hardware

ACCESSORIES

STAINLESS STEEL ADJUSTABLE LEGS

1. Carefully place unit on its side.

CAUTION

Do not lay unit on the side with the control panel or damage to unit could occur.

2.Thread the adjustable legs into the existing leg holes on the bottom of the unit. (See Figure 21.)

3.After all legs are secure, return the unit to the upright position.

NOTE: If unit is not level, use an adjustable open- end wrench to adjust the foot of each leg until unit is level. Each leg is adjustable from 6" (152 mm) to 7" (178 mm).

FLOOR MOUNTING HARDWARE

Stainless steel adjustable legs with deck mounting flange are available for securing the booster heater to the floor.

SHOCK ABSORBER

The shock absorber installed between the booster and the commercial dishwasher prevents hydraulic shock induced by rapidly operating valves. The shock can cause damage to the equipment.

Figure 21. Optional Stainless Steel Adjustable Legs

BLENDED PHOSPHATE WATER TREATMENT SYSTEM

The Blended Phosphate Water Treatment System is installed before the booster heater and reduces mineral scale build-up by introducing a measured amount of polyphosphate into the water.

29 Form No. EBOOSTERM-0406