Remove plastic storage compartment
INSTALLATION:
Note: The K9 unit will not slide into rear hatch opening without removing ream door trim panels. Side tunnels must also be removed.
1.Attach floor mounting plates to height adjustable front legs with ¼” x ¾” carriage bolts and serrated nuts. (Photos 1 and 2)
2.The holes in mounting plates will line up with OEM seat mount holes. Bolt the plate and leg assembly to vehicle using OEM seat bolts. Adjust leg height to 7 ¾” inch.
3.Slide K9 main housing into vehicle:
1
Using factory seat bolts; attach driver and passenger side mounting plates and legs as shown above.
Set height at 7 ¾”
3
Note: Mounting plate straddles a ridge in the floor. When bolts are tightened the plate will form to the floor.
4
5
2
7 ¾”
When positioned properly, holes in K9 floor will align with holes in mounting legs.
