English
Accessories
External view
......... Number of items
1
.........2
2
.........2
3
.........1
2CAUTION
The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above.
Installation Procedure
The
When the centre unit is compatible with the
1.To prevent a short circuit, remove the key from the ignition and disconnect the - battery.
2.Set the
3.Connect the speaker input wires to the front speaker wires of the wiring hernees of the centre unit.
4.Connect the control cable to the control connector.
5.Install the unit in your car.
6.Reconnect the - battery.
7.Press the reset button on the centre unit.
2CAUTION
•Do not connect the changer control cable while the centre unit is turned on.
•Be sure to press the reset button after installation.
•Whether the centre unit in use is compatible with the "N"- operation or not can be identified by referring to its instruction manual (description of the disc control mode, etc.).
•If you use the changer switching unit, see the instruction manual for the
•Do not let unconnected wires or terminals touch metal on the car or anything else conducting electricity. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
•Mount the unit so that the mounting angle is 30° or less.
