Kenwood KMD-D401 instruction manual Plus-one MD play, Switching Spectrum Analyzer Display

Plus-one MD play

Even when three MDs have been set in the main unit, a further MD can be played as the plus-one MD.

To play a plus-one MD (a fourth MD):

1Press one of the 01 - 03 buttons for at least one second. The MD currently set in the play position will now be stored in the stack position.

2Insert the MD in the MD slot.

The disc is then set in the play position. The indicator blinks and the disc begins to play.

NOTE

•While the plus-one MD is being played, the buttons 01 to 03 will blink red.

•An MD cannot be inserted when the operation indicator is red. Wait until it goes green, and then insert the MD.

•When a plus-one MD has been set in the main unit, the disc cannot be changed or the disc scan switched ON/OFF from the centre unit, nor can random magazine playback be switched ON/OFF from the centre unit.

•While the plus-one MD is playing, the disc repeat function will operate, but it cannot be cancelled from the centre unit.

To remove the plus-one MD:

Press one of the 01 - 03 buttons.

NOTE

While the plus-one MD is being ejected, the buttons 01 to 03 will blink green.

Switching Spectrum Analyzer Display

You can select the display to enjoy sounds with eyes.

Operation for "N" Setting:

Each time you press the DISP button, the spectrum analyzer display switches as follows;

Operation for "O" Setting:

1Selecting MD play source mode.

2Each time you press the DISP button, the spectrum analyzer display switches as follows;

▼

1"SCAN MODE ON":Displays 2 to 0 are automatically shown in succession for about five seconds each.

▼

2"PEAK HOLD"

▼

3"LASER"

▼

4"H-SCOPE"

▼

5"FIREWORKS"

▼

6"SQUASH"

▼

7"V-SCOPE"

▼

8"BLIZZERD"

▼

9"KISS"

▼

0"SIDE WAVE"

▼

!"SPEANA OFF":Spectrum analyzer off.

NOTE

•The spectrum analyzer name is not shown while the disc title or track title is being displayed.

•During operation 1, the DEMO indicator will light.

— 7 —