Rear Panel
| Figure 1: Rear Panel |
Power port | Connect the supplied power adapter here. |
10/100BaseT | Use standard LAN cables (RJ45 connectors) to connect your |
LAN port | PCs to these ports. |
| If required, any port can be connected to another hub. Any LAN |
| port will automatically function as an "Uplink" port when neces- |
| sary. |
Internet port | Connect the DSL or Cable Modem here. If your modem came |
(10/100BaseT) | with a cable, use the supplied cable. Otherwise, use a standard |
| LAN cable. |
Reset Button This button has two (2) functions:
∙Reboot. When pressed within 3~5 seconds, the power LED lights amber then released, the Wireless Router will re- boot (restart).
∙Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1.After Power On.
2.Hold the Reset Button down.
3.Keep holding the Reset Button more than 5 seconds, until the Amber LED has flashed.
4.Release the Reset Button. The Wireless Router is now using the factory default values.
