ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.
1. | Instruction Sheet | 2. Grassbag Frame 3. Grassbag Top Cover |
4. | Grassbag Fabric | 5. Supply Cable |
To prevent accidents cut off the long ribbon attached to the grass- bag and discard.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Unfold the handlebar to the operating position. Tighten all handlebar knobs to secure the handlebar in position.
Take care to ensure that the power cable does not become snagged at the pivot points.
Grassbag Attachment
Once the grassbag is assembled. Raise the rear deflector, pass the grassbag under the handlebar and hook in position. Lower the deflec- tor to rest on the grassbag.
Supply Cable
Route the supply cable loosely across to the cable cleat on the left side of the handlebar. Make a loop in the supply cable and secure to the cable cleat.
