OPERATING THE MOWER
Grassbag
To empty the grassbag raise the rear deflector and pass the grassbag under the handlebar and lower the rear deflector to rest against the rear of the mower.
Pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied regularly to prevent blockages and motor over- loading.
Without Grass Collection
Remove the grassbag and operate the mower with the rear deflector in the closed position.
Heavy Growth
Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce the height of cut and mow the area again as necessary until the required finish is obtained.
To prevent grass damage do not remove more than one third of grass height in one cut.
305113
CS284
Non-Grassed Areas
When moving the mower across
