| TROUBLE | SHOOTING |
|
|
| PROBLEM | POSSIBLE FAULT | REMEDY | |
|
|
|
|
|
| Motor vibrates excessively. | Mounting bolts loose. | Tighten bolts. | |
|
| Cutterblade bolt loose. | Tighten bolt. | |
|
| Cutterblade out of balance. | Balance cutterblade. | |
|
|
|
|
|
| Uneven cut | Undulating ground contours. | Change direction of travel. | |
|
| Cutterblade worn. | Sharpen the cutterblade. | |
|
| Cutterblade out of balance. | Balance cutterblade. | |
|
| Wheels / Roller damaged. | Inspect and replace as necessary. | |
|
|
|
|
|
| Discharge chute blocks. | Grass is wet. | Mow dry grass. | |
|
| Cut height too low. | Increase cut height. | |
|
| Grassbag full. | Empty grassbag. | |
|
| No airflow through the | Clean the grassbag. | |
|
| grassbag. |
|
|
|
|
|
|
|
| Mower is hard to push. | Cut height too low. | Increase cut height. | |
|
| Wheels / Roller damaged. | Inspect and lubricate or replace | |
|
|
| as necessary. | |
|
|
|
| |
| Poor grass collection. | No airflow through the | Clean the grassbag. | |
|
| grassbag. |
|
|
|
| Discharge chute blocked. | Remove blockage. |
Wet grass.
Mow dry grass.
Grassbag full.
Empty grassbag.