BEFORE STARTING THE MOWER

Prevent Engine Damage

To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting.

Oil Type

Always use high quality detergent oil classified SAE 10W-30. Never use additives with recommended oil.

To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’.

FILLER CAP/DIPSTICK

L

IO

MAX

HAY-G00118-A

Check Oil Level

Clean around the oil filter cap before removing. With the mower on a level surface. Remove the oil filler cap and wipe the dipstick with a clean cloth. Insert the dipstick into the oil filler neck, but do not screw it in, then remove to check the oil level.

HAY-G00119-A

The oil level is correct when it is at the full mark on the dipstick.

DO NOT OVERFILL.

MIN

FULL

0.15 Litres

DDA

Fuel Type

Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be used within 30 days. Never mix oil with petrol.

HAY-G00120-A

Fill to base of neck to allow for fuel expansion. Do not overfill the fuel tank.

FUEL FILLER CAP

FUEL LEVEL MARK

MAXIMUM FUEL

LEVEL

1.13

Page 13
Image 13
Hayter Mowers 184E XR44, 185E XR16 Before Starting the Mower, Prevent Engine Damage, Oil Type, Check Oil Level, Fuel Type