Hayter Mowers 433D Maintenance & Storage, 1.10, Safety Precautions, Operation, Stop the engine

Models: 432D 433D 434D 435D

1 36
Download 36 pages 9.71 Kb
Page 10
Image 10
Stop the engine:

SAFETY PRECAUTIONS

Operation

Do not tilt the mower when starting the engine.

Do not put hands or feet near or under rotating parts.

Never pick up or carry the mower while the engine is running.

Never lift the rear deflector while the engine is running.

Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.

Stop the engine and disconnect the spark plug lead:

-Before clearing blockages or unclogging the discharge chute.

-Before cleaning/checking or working on the mower.

-After striking a foreign object. Inspect the mower for damage and ensure necessary repairs are made before re-starting.

-If the mower starts to vibrate abnormally (check immediately).

Stop the engine:

-Whenever you leave the mower.

-Before refuelling.

-Reduce throttle control setting during engine shutdown and turn fuel valve off at the conclusion of mowing.

Maintenance & Storage

Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.

Frequently check fuel lines and fittings for cracks or leaks and replace if necessary.

Never check for a spark when the spark plug is removed. (Use approved tester)

Inspect the exhaust periodically and replace if worn or leaking.

Never crank the engine with the spark plug removed.

Never start the engine with the air-cleaner or air-cleaner cover removed.

Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark.

Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease.

1.10

Page 10
Image 10
Hayter Mowers 433D, 435D, 434D, 432D manual Maintenance & Storage, 1.10, Safety Precautions, Operation, Stop the engine