OPERATING THE MOWER
Controls
Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and (ground drive clutch levers - Autodrive models) return freely to their rest position when released.
Starting - Step 1
Turn the fuel valve to the on position. Move the throttle control lever to the ‘choke’ 
position before starting a cold engine. Move the throttle control lever to the ‘fast’ position before starting a warm engine.
Off 
On 
Step 2
Stand behind the mower and hold the handlebar with your left hand together with the engine stop lever. With your right hand hold the engine start - grip and pull slowly until resistance is felt, then pull rap- idly to crank the engine. Carefully return the start grip to the storage position when the engine starts.
When the engine warms up move the control lever to the fast position.
If the engine does not start after 5 attempts - refer to “Trouble
Shooting”.
Forward Travel
Push Models - Hold and push against the handlebar with both hands to move the mower forward.
Autodrive models - Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas.
If the engine stop lever is released the engine will stop.
1.14
