GB
4.Instructions for maintenance and storage
4.1Make sure that the nuts, bolts and screws are tight.
4.2Be careful when adjusting - danger of injuries. Do not trap your fingers between the housing and the blade. Wear protective gloves.
4.3Never store the lawn tractor with fuel in the tank inside a building in which petrol fumes can possibly come into contact with naked flames or with sparks
-danger of explosion!
4.4Only empty the petrol tank in the open.
4.5Allow the engine to cool down before you put the machine into an enclosed area.
4.6Avoid the risk of a fire by keeping the engine and the exhaust free of grass, leaves and grease (oil).
4.7Check regularly to make sure that the grass box is in a satisfactory condition.
4.8For safety's sake, worn or damaged parts must be replaced immediately.
4.9Replacement blades and additional appliances may only be mounted on the lawn tractors intended for this purpose according to the manufacturer's instructions. This is the only way to maintain the safety and the performance of your lawn tractor.
4.10Please ensure that the maintenance, checking and sharpening of the blade is only done by an authorised dealer.
4.11Only use original replacement blades.
We would point out that we are not liable according to the Product Liability Act for damage caused by our machine as a result of
a)improper repairs not carried out by our authorised service dealer,
b)or if ORIGINAL SPARE PARTS are not used as replacement parts.
Unpacking Lawntractor
The lawntractor will be delivered on a solid wood pallet.
To remove the packing, place the pallet on a level surface.
Please follow the sequence for unpacking and for the respective wheel locks.
The numbers to the left of the text, e.g. 10 , refer to the illustrations in the picture section of these operating instructions.
Open cardboard packing at top.
Remove staples and take off cardboard packing upward.
1 Remove enclosed parts and packing materials.
2 Remove wooden hoop.
3 Remove front laths.
4 Remove wooden blocks.
5 | Remove all nails on the pallet. |
Move mowing unit into highest position.
See operating instructions under:
>>
Lift tractor at rear and push off pallet.
Dispose of pallet and packing materials properly.
Secure the tractor from rolling away with the wheel locks!
Now you can begin mounting equipment.
GB 10