GB
44 Mowing system
On the mowing deck, there are two connections for a ½" water hose coupling.
The mowing system can be cleaned by connecting a water hose.
During the cleaning process, the grass box or a suitable accessory must be fitted.
1.Lower the mowing deck to the lowest cutting height.
2.Start the engine - set a medium engine speed.
3.Switch the mowing appliance on.
4.Connect the hose alternately to the connections and turn the water on.
After a few minutes, the mowing system has been cleaned.
5.Leave the mowing system to run for a few more minutes in order to spin the water out.
6.Clean the grass box and leave to dry.
MAINTENANCE AND SERVICE
Checking by a qualified service agent is necessary:
–after impact with an obstacle
–if the
–if the engine comes to an immediate standstill
–if the brake performance drops
–if the blade is bent (do not straighten)
–if the drive belt slips
–if the blade shaft is bent (do not straighten)
–if there is a defect in the blade holder
–if there is damage to the transmission.
Maintenance, service and cleaning work may only be carried out when the machine has been turned off and has cooled down and the ignition key has been removed.
The following tasks may be carried out by the user himself. All the other maintenance, service and upkeep tasks must be carried out by a qualified service agent.
| Before each | After each | After the |
| After 25 | After 50 | Before each |
|
| hours of | hours of | storage | |||
| use | use | first 5 hours | ||||
| operation | operation |
| ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Check level of engine oil | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Change engine oil |
|
| |
|
|
| |
|
|
|
|
|
|
|
|
Clean the air filter |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Replace the air filter |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Check the spark plug |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Check the brake | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check the tyre pressure | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check mowing blade | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check for loose parts | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
Check drive belt |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Clean the lawn tractor |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
Clean air intake grille on engine | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
Clean grass and cuttings from transmission |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
For hydrostat drive: |
| |
|
|
|
|
|
Clean ventilator for transmission cooling |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
| )* see operating instructions of the engine manufacturer | |||
In cases of high load and high temperatures, shorter maintenance intervals than those stated in the table may be necessary.
GB 17