Healthrider HREL59930 manual Pulse Sensor Troubleshooting, HOW to Calibrate the Incline System

Models: HREL59930

1 28
Download 28 pages 16.31 Kb
Page 22
Image 22

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the elliptical exerciser r egularly. Replace any worn parts immedi- ately.

For smooth

 

operation of the

 

elliptical exer-

Ramp

ciser, inspect

 

and clean the

 

ramp regularly

 

using a soft

 

cloth and mild

 

detergent.

 

Other parts of

 

the elliptical

 

exerciser can

 

 

also be cleaned in this way.

Keep liquids off the

console. Never

use abrasives or solvents.

 

PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function proper- ly, see step 6 on page 13.

HOW TO CALIBRATE THE INCLINE SYSTEM

If the elliptical exerciser’s incline system is not working properly, activate the calibration process by following the steps below.

1.

Hold down the + button and the Program button at

 

the same time for about five seconds. Note:

 

Numbers may appear in the left and right displays.

 

Disregard these numbers.

2.

Press the Program button again. Note: A combina-

HOW TO MOVE THE ELLIPTICAL EXERCISER

Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until

the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the

ramp, and lower the elliptical exerciser.

Due to the

size and weight of the elliptical exerciser, use

 

extreme caution while moving and lowering it.

 

Handlebars

Place your

foot here

Wheel

HOW TO LEVEL THE ELLIPTICAL EXERCISER

tion of letters and numbers may appear in the dis-

plays.

3. Press the 30° Ramp button. The ramp will move all

of the way up and then all of the way down.

4. Press the Program button three times. The con-

sole will then be in the normal operating mode and

the elliptical exerciser will be ready for use.

If the elliptical exerciser r ocks during use, turn one or both of the leveling feet under the rear stabilizer until

the rocking motion is elimi- nated.

Leveling

Foot

22

Page 22
Image 22
Healthrider HREL59930 manual Pulse Sensor Troubleshooting, HOW to Calibrate the Incline System