Healthrider HREL69011 manual Assembly requires two persons, Adjustable wrench A rubber mallet

ASSEMBLY

Assembly requires two persons.	Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included allen wrenches, assembly requires a phillips screwdriver		, an
adjustable wrench	, and a rubber mallet	.

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.

The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on

page 22. The second number refers to the quantity used in assembly.	Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M10 Split	M8 Nylon	M10 Nylon	M4 x 16mm
	Locknut (46)–4	Locknut (29)–6	Screw (66)–2
Washer (70)–3
		M8 x 45mm Button Bolt (83)–4
M10.3 Black	M10 Washer
Washer (53)–2	(38)–6
		Adjustment Bolt (20)–2
M8 x 19mm Button	M10 x 27mm
Screw (22)–2	Screw (71)–3
		M10 x 78mm Button Bolt (27)–2
M6 x 25mm		M10 x 112mm Carriage Bolt (34)–4
Screw (63)–1
		5