3. With the help of a second person, raise the treadmill

Frame (55). Hold the Latch Housing (68) and the Latch Housing Cover (5) against the sides of the Frame as shown. Loosely thread the two blunt-tipped 1/2” Screws

(132)into the Latch Housing Cover and the Latch Housing

as shown. Do not tighten the Screws yet.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin. The collar should be on the side of the spring shown. Insert the pin into the Latch Housing (68), and tighten the knob back onto it.

Align the pin with the hole in the Left Handgrip (140) by sliding the Latch Housing (68) up or down. Make sure that the pin can be inserted fully into the hole. Hold the Latch Housing in place as you tighten two 1/2” Tek Screws (143) into the Latch Housing and the Frame (55). Then, tighten

the 1/2” Screws (132). Note: It may be necessary to pull on the knob to access and tighten the Screws.

3

 

Hole

Knob

140

132

5

68

 

143

Small

Collar

Holes

 

 

55

Spring

 

Pin

 

132

143

4.Make sure that all parts are properly tightened before you use the treadmill. Place a mat beneath the

treadmill to protect the floor or carpet.For your benefit, we recommend that you familiarize yourself with the TROUBLESHOOTING section on pages 26 and 27.

If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver included with the chest pulse sensor.

1. Make sure that the power cord is unplugged.

Remove

the indicated Screw (40) and the Access Door (135).

 

2. Remove the paper from the adhesive pad on the back of

the receiver (A). Orient the receiver so the small cylin- der is near the lower edge of the receiver and is fac-

ing the Console Back (117) as shown.Firmly press the receiver onto the indicated corner of the Access Door

(135). Connect the wire on the receiver to the Pulse Wire (101) extending from the Console Back.

3. Make sure that no wires are pinched.Reattach the

Access Door (135) with the Screw (40). Note: The other wires included with the receiver may be discarded.

 

117

101

 

A

 

Cylinder

135

 

40

7

Page 7
Image 7
Healthrider HRTL71830 manual As shown. Do not tighten the Screws yet, Make sure that the power cord is unplugged

HRTL71830 specifications

The Healthrider HRTL71830 is a multifunctional treadmill designed for both beginners and seasoned fitness enthusiasts. With a strong emphasis on providing a supportive and engaging workout experience, this model incorporates advanced features and technologies aimed at optimizing performance and comfort.

One of the standout features of the Healthrider HRTL71830 is its powerful motor, which delivers consistent performance during intense workouts. Boasting a peak horsepower of 2.5, it allows users to run, jog, or walk at varying speeds to suit their fitness levels. The motor is complemented by a spacious running surface, measuring 20 inches wide and 55 inches long. This generous size ensures ample room for comfortable movement, accommodating users of all sizes.

The HRTL71830 also comes equipped with adjustable incline settings. The incline technology allows users to simulate uphill training, which can significantly enhance calorie burning and improve cardiovascular health. With a quick one-touch incline adjustment feature, users can switch between different incline levels effortlessly, making their workouts more versatile.

Another prominent characteristic of this treadmill is its advanced cushioning system. The proprietary FlexSelect cushioning technology provides users with the option to customize their running surface. This feature reduces the impact on joints, offering a softer feel during runs, while also allowing for a firmer surface when desired, mimicking outdoor conditions.

To enhance the user experience, the Healthrider HRTL71830 features a built-in console with a large display. The console displays essential workout metrics including time, speed, distance, calories burned, and heart rate, allowing users to track their progress effectively. Additionally, the treadmill offers multiple built-in workout programs that cater to various fitness goals, from weight loss to endurance training.

Incorporating connectivity features, the HRTL71830 includes Bluetooth technology, enabling users to connect their devices seamlessly for music playback or interaction with fitness apps. This modern touch makes workouts more enjoyable and motivates users to stay engaged throughout their exercise routines.

In summary, the Healthrider HRTL71830 is a robust treadmill that combines power, versatility, and advanced technology to meet the diverse needs of users. With features such as a powerful motor, adjustable incline, FlexSelect cushioning, an intuitive console, and connectivity options, it stands as a strong contender for anyone looking to enhance their home workout regimen.