B. Design and Installation Considerations

Notice: Check building codes prior to installation.

Installation MUST comply with local, regional, state and national codes and regulations.

Consult insurance carrier, local building inspector, fire officials or authorities having jurisdiction over restrictions, installation inspection and permits.

Before installing, determine the following:

Where the fireplace is to be installed.

The vent system configuration to be used.

Gas supply piping.

Framing and finishing details.

Whether optional accessories are desired.

C. Draft

Draft is the pressure difference needed to vent fireplaces successfully. When a fireplace is drafting successfully, all combustion by-products are exiting the home through the chimney.

Considerations for successful draft include:

Preventing negative pressure

Location of fireplace and chimney

Notice: Hearth & Home Technologies assumes no responsibility for the improper performance of the fireplace system caused by:

Inadequate draft due to environmental conditions

Downdrafts

Tight sealing construction of the structure

Mechanical exhausting devices

Improper positioning of the chimney in a not-recommended location on the roof.

D. Negative Pressure

Warning! Risk of Asphyxiation! Negative pressure can cause spillage of combustion fumes and soot. Fire must draft properly for safe operation.

Negative pressure results from the imbalance of air avail- able for the fireplace to operate properly. It can be stron- gest in lower levels of the house.

Causes include:

Exhaust fans (kitchen, bath, etc.)

Range hoods

Combustion air requirements for furnaces, water heaters and other combustion appliances

Clothes dryers

Location of return-air vents to furnace or air conditioning

Imbalances of the HVAC air handling system

Upper level air leaks such as:

-Recessed lighting

-Attic hatch

-Duct leaks

To minimize the effects of negative air pressure:

Ensure adequate outdoor air for all combustion appliances and exhaust equipment

Ensure furnace and air conditioning return vents are not located in the immediate vicinity of the fireplace

Avoid installing the fireplace near doors, walkways or small isolated spaces

Recessed lighting should be a “sealed can” design

Attic hatches weather stripped or sealed

Attic mounted duct work and air handler joints and seams taped or sealed

Basement installations should be avoided

Notice: The fireplace provides some outside air for combustion. Other methods may be necessary if more air is required.

Notice: Hearth & Home Technologies Inc. recommends the use of direct vent appliances in basements.

Heatilator • Birmingham BIR50-B4059-682C• 8/12

15

Page 15
Image 15
Hearth and Home Technologies BIR50-B owner manual Design and Installation Considerations, Draft, Negative Pressure

BIR50-B specifications

The Hearth and Home Technologies BIR50-B is a sophisticated and innovative fireplace insert that has made significant strides in enhancing home heating and ambiance. As a leading product in the market, this model combines advanced technology with aesthetic elegance, making it a perfect choice for homeowners looking to upgrade their living spaces.

One of the standout features of the BIR50-B is its impressive thermal efficiency. The unit is engineered to deliver high heat output while minimizing fuel consumption. This efficiency is partly due to its advanced combustion system, which maximizes heat while reducing emissions, making it an environmentally friendly choice for consumers concerned about their carbon footprint.

The insert's design is another significant aspect that sets it apart. Its sleek and modern aesthetic, complemented by a large viewing area, allows for an unobstructed view of the flames. This not only provides a mesmerizing visual experience but also adds a cozy atmosphere to any room. The clean, stylish lines of the BIR50-B make it suitable for a wide variety of home décor styles, blending seamlessly with both contemporary and traditional interiors.

In terms of functionality, the BIR50-B is equipped with user-friendly control options. The intuitive interface allows homeowners to adjust heat levels and flame settings with ease. Additionally, the insert has an integrated blower system that effectively circulates warm air throughout the space, ensuring consistent heating regardless of room size.

Durability is also a key characteristic of the BIR50-B. Constructed from high-quality materials, it is built to withstand the test of time, ensuring that it remains a reliable source of warmth and comfort for years to come. The product comes with a comprehensive warranty, reflecting the manufacturer's confidence in its long-term performance.

Installation is made convenient with the BIR50-B, as it is designed to fit into existing fireplaces, eliminating the need for extensive renovations. This feature makes it an attractive option for homeowners looking for an efficient upgrade without the hassle of a complete overhaul.

In summary, the Hearth and Home Technologies BIR50-B fireplace insert is an exceptional choice for those seeking an efficient, stylish, and durable heating solution. With its impressive thermal efficiency, modern design, user-friendly controls, and ease of installation, it stands out as a premier option for enhancing any living space. Whether for supplemental heating or as a primary heat source, the BIR50-B delivers both performance and aesthetic appeal, making it a valuable addition to any home.