Manuals / Hearth and Home Technologies / Household Appliance / Stove

Hearth and Home Technologies CASTILE-CSB Castile Pellet Stove High Ash Fuel Content Maintenance

Models: CASTILE-PMH1 CASTILE-CSB CASTILE-MBK1 CASTILE-CWL

1 48
Download 48 pages 39.63 Kb
Page 31
Image 31

R

Castile Pellet Stove

C. High Ash Fuel Content Maintenance

•Frequency: When the ash build-up exceeds more than half way up the firepot.

•By: Homeowner

Poor quality pellet fuel, or lack of maintenance, can create conditions that make the firepot fill quickly with ashes and clinkers.

This condition makes the appliance susceptible to overfilling the firepot with pellets which may result in smoking, sooting and possible hopper fires. Figure 31.1 shows an example where the firepot overfills, pellets back up into the feed tube and ash has accumulated in the firebox.

An inefficient and non-economical method of burning of fuel caused by poor quality pellet fuel is shown in Figure 31.2.

The correct flame size when good quality, premium pellet fuel is burned is shown in Figure 31.3.

If the ash buildup exceeds the half way point in the firepot

IMMEDIATE ATTENTION AND CLEANING IS REQUIRED.

Figure 31.1

D.Blower Replacement

1.Convection Blower Replacement

a. Turn down thermostat, let appliance completely cool and then unplug appliance before servicing.

b.The convection blower is located at the bottom rear of the appliance and is housed inside a screen box. Remove the 2 screws facing forward in the center of the blower chamber at the very back of the appliance.

c.If an outside air kit is installed on the appliance, these screws attach the intake air channel piece of the outside air kit to the appliance. Remove the 2 screws and pull backwards on the channel and it will slide down and away from the appliance. The air channel, collar and outside air hose will be removed as one piece.

d.There are 2 screws on each side of the housing. Loosen all 4 screws, but do not remove them. Lift the blower housing up slightly and slide towards you. Figure 31.4.

e.Remove the left side panel by loosening 2 screws (do not remove) and pull side panel away. Unplug the 2 black blower wires by disconnecting the spade connectors.

f.To remove blower from the housing, remove 2 screws in the front of the housing and very carefully bend the 2 housing sides out and bend the back of the housing away from the blower. This allows for room to access the back 2 screws and nuts (4 total) that is securing the blower to the housing.

g.Remove blower and replace with new blower.

e. Re-install in reverse order.

Incorrect

Tall, Lazy Flame, Orange in Color

Figure 31.2

Correct

Figure 31.1

Correct Flame Size, Yellow/White in Color

Loosen (do not remove) 2 screws on each side and lift off blower housing

Remove left side panel and discon- nect blower wires

Convection Blower & Housing

Figure 31.3

Figure 31.4

September 1, 2008

250-6422E

Page 31

Page 30 Page 32
Page 31
Image 31
Hearth and Home Technologies CASTILE-CSB, CASTILE-MBK1, CASTILE-PMH1 Castile Pellet Stove High Ash Fuel Content Maintenance
Page 30 Page 32

CASTILE-PMH1, CASTILE-CSB, CASTILE-MBK1, CASTILE-CWL specifications

Hearth and Home Technologies is renowned for its innovative and efficient heating solutions, among which the CASTILE line of products stands out. The CASTILE-CWL, CASTILE-MBK1, CASTILE-CSB, and CASTILE-PMH1 represent a blend of tradition and modern technology, designed to enhance home comfort while prioritizing energy efficiency and ease of use.

The CASTILE-CWL is a versatile unit featuring a sleek design that fits effortlessly into various decors. It incorporates an advanced combustion system that promotes cleaner burning, reducing emissions while delivering robust heat output. Its large hopper capacity minimizes the frequency of refueling, making it ideal for continuous heating. Additionally, the intuitive control panel offers user-friendly operation, allowing homeowners to set their ideal temperature easily.

Next, the CASTILE-MBK1 model boasts a unique design compatible with many different settings. It features enhanced insulation that ensures maximum heat retention and minimizes heat loss. The automatic ignition and advanced safety features ensure that use is not only efficient but also worry-free. Moreover, this model includes a programmable thermostat, giving users the ability to set heating schedules according to their preferences.

The CASTILE-CSB is particularly notable for its integration of modern technology with traditional aesthetics. Its compact design doesn’t skimp on performance, and its high-efficiency rating translates to lower energy bills. With features like a quiet operation system and a digital display for monitoring, the CASTILE-CSB is perfect for homes of any size. The model also offers customizable options for different finishes, allowing homeowners to match their heating source with their interior design.

Finally, the CASTILE-PMH1 rounds out this impressive lineup. This model is designed for reliable performance, providing consistent warmth with its state-of-the-art heat exchanger technology. The chimney venting system enables optimal heat distribution throughout the home while maintaining safety standards. Additionally, it includes features such as an easy-clean design and multiple heat settings, allowing users to tailor their heating experience.

In summary, Hearth and Home Technologies’ CASTILE product line offers an impressive combination of style, efficiency, and advanced features. Each model caters to specific needs while upholding the brand's commitment to quality and innovation, ensuring homeowners can enjoy a warm and inviting living environment.