Hearth and Home Technologies CASTILE-CWL, CASTILE-MBK1, CASTILE-PMH1, CASTILE-CSB Glass Replacement

R

Castile Pellet Stove

G. Glass Replacement

WARNING

•Glass is 5mm thick high temperature heat- resistant ceramic glass.

•DO NOT REPLACE with any other material.

•Alternate material may shatter and cause injury

a.Open the face and remove door from the appliance by lifting door off of hinge pin and lay on a flat surface face down.

b.Using a screwdriver, tap the bottom of the rope retainer rod to push it up out of the hole. The top end of the rod will slide up. Swing the rod toward you from the bottom and remove the rod. Repeat for other side.

c.Remove old glass and replace with new glass.

d.Slide the retainer rod into the top hole first, and then line up the bottom crimped end with the hole in the door. The crimped end must be parallel with the glass in order to insert it into place. Figure 34.1.

Rope Retainer

Rods

Glass	Slide top
	end in first

Crimped end at the bottom

Crimped end must be parallel with the glass

Figure 34.1

Page 34 250-6422E September 1, 2008