Safety Alert Key:
•DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.
•WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
•CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
•NOTICE: Used to address practices not related to personal injury.
Table of Contents
A. | Congratulations | 2 |
B. | Warranty | 5 |
1 Listing and Code Approvals
A. | Appliance Certification | 7 |
B. | Tempered Glass Specifications | 7 |
C. | BTU Specifications | 7 |
D. | High Altitude Installations | 7 |
E. | 7 | |
F. | Combustible Materials Specification | 7 |
G. | Electrical Codes | 7 |
User Guide
2 Operating Instructions
A. | Gas Fireplace Safety | 8 |
B. | Your Fireplace | 8 |
C. | Fan Kit (optional) | 9 |
D. | Clear Space | 9 |
E. | Decorative Doors and Fronts | 9 |
F. | Fixed Glass Assembly | 9 |
G. | Remote Controls, Wall Controls and Wall Switches 9 | |
H. | Outside Air (optional) | 9 |
I. | Before Lighting Fireplace | 9 |
J. | Lighting Instructions (IPI) | 10 |
K. | After Fireplace is Lit | 11 |
L. | Frequently Asked Questions | 11 |
3 Maintenance and Service
A. | Maintenance | 12 |
B. | Maintenance | 13 |
Installer Guide
4 Getting Started
A. | Typical Appliance System | 14 |
B. Design and Installation Considerations | 15 | |
C. Tools and Supplies Needed | 15 | |
D. | Inspect Appliance and Components | 15 |
E. | Negative Pressure | 16 |
5 Framing and Clearances
A. | Selecting Appliance Location | 17 |
B. | Constructing the Appliance Chase | 17 |
C. | Clearances | 18 |
D. | Mantel and Wall Projections | 19 |
6 Termination Locations
A. Vent Termination Minimum Clearances | 20 |
7 Vent Information and Diagrams
A. | Vent Guidelines | 21 |
B. | Vent System Configuration | 21 |
8 Vent Clearances and Framing
A. | Pipe Clearances to Combustibles | 22 |
B. | Wall and Ceiling Penetration Framing | 22 |
C. | Vertical Penetration Framing | 22 |
9 Appliance Preparation
A. | Install Outside Air Kit Damper Assembly | 23 |
B. | Gas and Electrical Connections | 23 |
C. Secure and Level the Appliance | 23 |
10 Installing Vent Pipe
A. | Assembly of Vent Sections | 24 |
B. | Attach Vent to Firebox | 24 |
C. | Secure Vent Sections | 24 |
D. | Install Attic Insulation Shield | 24 |
11 Gas Information
A. | Fuel Conversion | 25 |
B. | Gas Pressure | 25 |
C. | Gas Connection | 25 |
D. | High Altitude Installations | 25 |
12 Electrical Information
A. | Wiring Requirements | 26 |
B. | Intellifire Ignition System Wiring | 26 |
C. | Optional Accessories Requirements | 26 |
D. | Electrical Service and Repair | 26 |
E. | Junction Box Installation | 27 |
F. | Wall Switch Installation for Fan (Optional) | 27 |
13 Finishing
A. | Mantel and Wall Projections | 28 |
B. | Facing Material | 28 |
Heatilator • Caliber Mesh BV Series • | 3 |