Hearth & Home Technologies Inc. 800 W.

Jefferson, Lake City, MN 55041.

e.Remote Transmitter Function

1)The hand held remote transmitter is only an ON/OFF control. When the transmitter is active, the remote LED light will be RED. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system’s design.

2)With the main power switch (located on the appliance) in the “ON” position, press the ON button on the hand held remote transmitter to turn on the appliance. The transmitter does not control/change the other switches or controls located on the appliance. Features of the appliance (flame motion and heater) will remain in their last set position. If you would like to change the setting you will have to access the manual controls (located on the appliance) to set the desired position.

3)To turn off the appliance, press the OFF button on the hand held remote transmitter.

4)With the appliance turned on by the hand held remote transmitter, you can override it by turning the manual flame switch on the appliance to “OFF” or by turning the optional wall switch off .

5)Operation of the switches on the dashboard will override all other switches within the appliance system and be operated by the dashboard switches.

3.Wall Switch Control (hardwired appliances only) (WSK-21 & WSK-21-W)

a.The wall switch wiring can be found in the Section “F. Wiring”.

b.The wall switch has an operating voltage of 24VAC, do not hook up to 120/208/240VAC. For installations you can use 24AWG thermostat wire connected to a standard wall switch. It is recommended not to exceed 15’ of wire from appliance.

c.With the main power switch (located on the appliance) in the “ON” position, the wall switch can turn the appliance on and off. The wall switch does not control the other switches or controls located on the appliance. Features of the appliance (flame motion and heater) will remain in their last set position. If you would like to change the setting, you will have to access the manual controls (located on the appliance) to set the desired position.

d.With the appliance turned onby the wall switch, you can override it by turning the manual flame switch on the appliance to “OFF” or by pressing the OFF button on the remote transmitter.

4.FCC Requirements

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio or TV technician for help.

CANADIAN EQUIPMENT REQUIREMENTS

This digital apparatus does not exceed the Class A/Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This device complies with RSS-210of Industry and Science Canada. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

13

CRESTFIRE SERIES ELECTRIC FIREPLACE

10/03 4030-239 Rev G

Page 12 Page 14
Page 13
Image 13
Hearth and Home Technologies CF750EV (208/240V), CF550EV, CF750E (120V) FCC Requirements, Remote Transmitter Function
Page 12 Page 14

CF550EV, CF750E (120V), CF550E, CF750EV (208/240V) specifications

Hearth and Home Technologies has established itself as a leader in providing innovative heating solutions that combine efficiency, style, and functionality. The CF750EV (208/240V), CF550E, CF750E (120V), and CF550EV are among their latest electric fireplace offerings, designed to cater to various needs and preferences.

The CF750EV is a robust model that operates on 208/240V, featuring an impressive heat output while maintaining energy efficiency. This model is equipped with advanced technology, allowing users to customize their heating experience. It boasts a realistic flame presentation, adjustable flame intensity, and a user-friendly LED display, making it an aesthetically pleasing addition to any space. The CF750EV also includes a built-in thermostat and a remote control, offering convenience and control at your fingertips.

The CF550E is designed for those seeking a compact solution without compromising on performance. This electric fireplace operates effectively at 120V, making it suitable for spaces where electrical capacity may be limited. Its sleek design allows for easy installation in various room configurations, and it provides an inviting ambiance while efficiently warming the area.

In contrast, the CF750E is another 120V model that stands out for its higher heat output compared to the CF550E. This fireplace also features adjustable flame effects, enhancing its visual appeal. The unit’s clean lines and modern design make it a versatile choice for contemporary homes. The CF750E is also integrated with safety features such as overheating protection, ensuring peace of mind during use.

Lastly, the CF550EV model combines the best of both worlds with its advanced electric technology and fireplace aesthetics. This unit is designed to complement any décor while providing warmth and a cozy atmosphere. The CF550EV includes customizable heat settings and a realistic flame effect, making it suitable for year-round use, regardless of the season.

Collectively, these models from Hearth and Home Technologies embody the perfect blend of technology, design, and functionality. They cater to various needs, whether you are looking for a powerful heating solution or a stylish accent piece for your living space. With their emphasis on efficiency and modern features, these electric fireplaces stand as a testament to the brand’s commitment to quality and innovation in home heating solutions.
Top Page Image Contents