3 Framing and Clearances
NOTE:
•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
A.Selecting Appliance Location
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings
•To combustibles
•For service access
Locate appliance away from traffic areas.
When selecting a location for your appliance it is important to consider the required clearances to walls (see Figure 3.1).
NOTE: For actual appliance dimensions refer to Sec- tion 16.
B
D |
| In addition to these framing dimensions, also reference the |
| ||
|
| following sections: |
•Clearances and Mantel Projections (Section 3.C and 3.D)
•Vent Clearances and Framing (Section 6)
C
A
| A | B | C | D |
Inches | ||||
Millimeters | 625 | 597 | 886 | 384 |
Figure 3.1 Framing Dimensions
6 | Heat & Glo • Crescent II • |