EC SERIES INSTALLATION INSTRUCTIONS

18. Position the Hearth Extension

Position and secure the hearth extension over the protective metal strips that have been placed partially under the fireplace front. These strips should be protruding approximately 2 in. from under the fireplace front and 2 in. on both sides of the fireplace opening. Seal the crack between the hearth extension and fireplace with a bead of noncombustible sealant. See Figure 19. Apply a noncombustible finishing material of your choice to the hearth extension.

Figure 19 - Position the Hearth Extension

19. Finishing Material

Do not install combustible materials over the black face of the fireplace! This poses a safety hazard and may start a fire. You may only use noncombustible material over the black face of the fireplace.

a.Combustible Material

Material which is made of or surfaced with wood, compressed paper, plant fibers, plastics, or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered.

b.Noncombustible Material

Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof.

c.Noncombustible Sealant Material

Sealants which will not ignite and burn; General Electric RTV103 Black (or equivalent), Rutland, Inc. Fireplace Mortar #63 (or equivalent).

After completing the framing and applying the facing material (dry wall) over the framing, a 1/2 in. wide (maximum) bead of noncombustible sealant must be used to close off any gaps at the top and sides between the fireplace and facing to prevent cold air leaks.

Only noncombustible materials may be used to cover the black metal fireplace front.

20.Mantel

A combustible mantel may be positioned no lower than 12 in. above the top of the fireplace opening. The combustible mantel may have a maximum depth of 12in. Combustible trim pieces that project no more than 1-1/2 in. from the face of the fireplace can be placed no closer than 6 in. from the top of the fireplace opening. Combustible trim must not cover the black metal surfaces of the fireplace. This mantel clearance is in accordance with Section 7-3.3.3 of ANSI/ NFPA211.

21. Glass Doors

This fireplace has been tested and listed for use with doors as specified in Section C, “System Components”. Please refer to the manual packed with each set of doors for installation instructions.

08/04

17339 Rev L

21

Page 20 Page 22
Page 21
Image 21
Hearth and Home Technologies EC36 manual Position the Hearth Extension, Finishing Material, Mantel, Glass Doors
Page 20 Page 22

EC36 specifications

Hearth and Home Technologies EC36 is a well-regarded product in the realm of modern heating solutions, appealing to consumers seeking a combination of efficiency, aesthetics, and advanced technology. Aimed at both form and function, the EC36 is perfectly suited for today’s homes, blending seamlessly into various interior designs while providing exceptional warmth.

One of the defining features of the EC36 is its efficient heating capacity. With a maximum output of 36,000 BTUs, this unit provides considerable heat for areas up to 1,200 square feet. This makes it an ideal choice for medium to large living spaces, ensuring that your home remains cozy during the coldest months. The innovative design of the EC36 enhances heat distribution, allowing for consistent warmth throughout a room.

The technology behind the EC36 is equally impressive. It utilizes advanced burning technology which promotes efficiency and minimizes emissions. The unit is equipped with a sealed combustion system, allowing it to draw outside air for combustion, rather than using the indoor air. This not only improves efficiency but also enhances air quality within the home. The EC36 is engineered to meet or exceed environmental standards, making it a responsible choice for eco-conscious consumers.

Another characteristic worth noting is the customizable aesthetic of the EC36. The unit is available in various finishes, allowing homeowners to select a style that complements their décor. From sleek black to traditional finishes, the EC36 easily integrates into any design scheme. Additionally, the large viewing window provides a beautiful showcase of the flames, creating an inviting atmosphere.

The operation of the EC36 is designed with user convenience in mind. It features an easy-to-use control panel and offers optional remote control capabilities, enabling homeowners to adjust settings from across the room. The reliability of the ignition system further simplifies operation, allowing users to enjoy the warmth without the hassle.

In conclusion, Hearth and Home Technologies EC36 stands out as a robust choice for effective home heating. With its impressive BTU output, advanced burning technology, customizable aesthetics, and user-friendly operation, the EC36 not only meets but exceeds the expectations of modern homeowners seeking comfort, style, and efficiency.
Top Page Image Contents