EC SERIES INSTALLATION INSTRUCTIONS

2.Chimney Height Requirements (above roof line)

a.Major building codes specify a minimum chimney height above the roof top. These specifications are summarized in what is known as the Ten Foot Rule. This rule states:

“If the horizontal distance from the side of the chimney to the peak of the roof is 10 ft or less, the top of the chimney must be at least 2 ft above the peak of the roof, but never less than 3 ft in overall height above the highest point where it passes through the roof.

“If the horizontal distance from the side of the chimney to the peak of the roof is more than 10 ft, a chimney height reference point is established on the surface of the roof a distance of 10 ft from the side of the chimney in a horizontal plane. The top of the chimney must be at least 2 ft above this reference point, but never less than 3 ft in height above the highest point where it passes through the roof.” See Figure 8.

b.These chimney heights are necessary in the interest of safety but do not ensure smoke-free operation. Trees, buildings, adjoining roof lines, adverse wind conditions, etc. may create a need for a taller chimney should smoking occur.

Figure 8 - Chimney Height

3. Number of Sections Required

To determine the chimney components needed to complete your particular installation, follow the steps below:

a.Determine the total vertical height of the fireplace installation. This dimension is measured from the base of the fireplace assembly to the point where the smoke exits the termination cap.

b.Subtract the effective height of the fireplace assembly from the overall height of the fireplace installation (measured from the base of the fireplace to the bottom of the termination cap).

c.Refer to Table 2 to determine what components must be selected to complete the fireplace installation.

d.Determine the number of firestop spacers, stabilizers, roof flashing, etc. required to complete the fireplace installation.

Table 2

HEIGHT OF CHIMNEY COMPONENTS

Chimney Stabilizer

 

 

SL3

4-3/4 in.

 

 

 

Firestop Spacers

 

 

FS338

0 in.

 

 

 

 

FS339

0 in.

 

 

 

 

FS340

0 in.

 

 

 

Offsets/Returns

 

 

SL315

13-3/8 in.

 

 

 

 

SL330

14-1/2 in.

 

 

 

Roof Flashing

 

 

RF370

0 in.

 

 

 

 

RF371

0 in.

 

 

 

Chimney Sections*

 

 

SL306

4-3/4 in.

 

 

 

 

SL312

10-3/4 in.

 

 

 

 

SL318

16-3/4 in.

 

 

 

 

SL324

22-3/4 in.

 

 

 

 

SL336

34-3/4 in.

 

 

 

 

SL348

46-3/4 in.

 

 

 

* Dimensions reflect effective height

14

17339 Rev L

08/04

Page 14
Image 14
Hearth and Home Technologies EC36 manual Chimney Height Requirements above roof line, Number of Sections Required

EC36 specifications

Hearth and Home Technologies EC36 is a well-regarded product in the realm of modern heating solutions, appealing to consumers seeking a combination of efficiency, aesthetics, and advanced technology. Aimed at both form and function, the EC36 is perfectly suited for today’s homes, blending seamlessly into various interior designs while providing exceptional warmth.

One of the defining features of the EC36 is its efficient heating capacity. With a maximum output of 36,000 BTUs, this unit provides considerable heat for areas up to 1,200 square feet. This makes it an ideal choice for medium to large living spaces, ensuring that your home remains cozy during the coldest months. The innovative design of the EC36 enhances heat distribution, allowing for consistent warmth throughout a room.

The technology behind the EC36 is equally impressive. It utilizes advanced burning technology which promotes efficiency and minimizes emissions. The unit is equipped with a sealed combustion system, allowing it to draw outside air for combustion, rather than using the indoor air. This not only improves efficiency but also enhances air quality within the home. The EC36 is engineered to meet or exceed environmental standards, making it a responsible choice for eco-conscious consumers.

Another characteristic worth noting is the customizable aesthetic of the EC36. The unit is available in various finishes, allowing homeowners to select a style that complements their décor. From sleek black to traditional finishes, the EC36 easily integrates into any design scheme. Additionally, the large viewing window provides a beautiful showcase of the flames, creating an inviting atmosphere.

The operation of the EC36 is designed with user convenience in mind. It features an easy-to-use control panel and offers optional remote control capabilities, enabling homeowners to adjust settings from across the room. The reliability of the ignition system further simplifies operation, allowing users to enjoy the warmth without the hassle.

In conclusion, Hearth and Home Technologies EC36 stands out as a robust choice for effective home heating. With its impressive BTU output, advanced burning technology, customizable aesthetics, and user-friendly operation, the EC36 not only meets but exceeds the expectations of modern homeowners seeking comfort, style, and efficiency.