Zebra Technologies ZM400 Printing Specifications Ribbon Specifications, Standard Printer Fonts

				ZM400/ZM600
Printing Specifications				Ribbon Specifications
• 203 dpi resolution (8 dots/mm)				• Ribbon width: 2.00" (51mm) to 4.33" (110mm)
- Dot size (W x L):				• Standard Lengths: 984' (300m) or 1476' (450m)
0.0049" x 0.0049" (0.125mm x 0.125mm)				• Maximum ribbon roll size:
• 300 dpi resolution (12 dots/mm)				3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
- Dot size (W x L):				• Ribbon wound ink-side out (Ribbon wound ink-side in can be
0.0033" x 0.0039" (0.084mm x 0.099mm)				used with optional ribbon spindle).
• 600 dpi resolution (24 dots/mm)
- Dot size (WxL):				Standard Printer Fonts
0.0016” x 0.0016” (0.042mm x 0.042mm)				Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times,
• First dot location measured from inside media backing edge:
				height and width independently. However, fonts E and H (OCR-A
0.10" ±.04" (2.5mm ± 1 mm)
				and OCR-B) are not considered “in-spec" when expanded.
• Maximum print width: 4.09" (104mm)
				The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is
• Maximum continuous media print length:				expandable on a dot-by-dot basis, height and width independent,
	203 dpi	300 dpi	600 dpi	while maintaining smooth edges. Maximum character size depends
	157"	73”	39"	on available memory.
	3988mm	1854mm	991mm	IBM Code Page 850 international character sets are available in the

•		fonts A, B, C, D, E, F, G, and 0 through software control.
	Media registration tolerance:
	- Vertical = < ±0.039" (±1.0mm) on non-continuous media - ---
•	Horizontal = < ±0.039" (±1.0mm) within a roll of media			Font		Matrix			Type*				Character Size
	Programmable print speeds:
												Inches			Millimeters
	- 203 dpi = 2.4" (61mm), 3” (76mm) through 10" (254mm) per
							Gap
	second in 1" increments
	- 300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm) per				Height	Width	character-Inter				Height	Width	Char/inch	Height		Width	Char/mm
	second in 1" increments
	- 600 dpi = 1.5” (38mm), 2” (51mm), 3” (76mm), 4” (102mm)
	per second
				A	9	5	1		U-L-D	0.044		0.029	34.0	1.13		0.75	1.33
Media Specifications				B	11	7	2		U	0.054		0.044	22.7	1.38		1.13	0.89
				C,D	18	10	2		U-L-D	0.088		0.059	17.0	2.25		1.50	0.67
• Maximum non-continuous label length: 39" (991mm)
				E	28	15	5		OCR-B	0.137		0.098	10.2	3.50		2.50	0.40
				F	26	13	3		U-L-D	0.127		0.078	12.8	3.25		2.00	0.50
• Media type: continuous, die-cut, tags, black-mark
				G	60	40	8		U-L-D	0.294		0.235	4.3	7.50		6.00	0.17
• Media web width (label and liner):
				H	21	13	6		OCR-A	0.103		0.093	10.7	2.63		2.38	0.42
	1.0" (25.4mm) to 4.50" (114mm) Tear / Cutter
				GS	24	24	2	SYMBOL		0.118		0.127	7.8	3.00		3.25	0.31
	1.0” (25.4mm) to 4.25” (108mm) Peel / Rewind
•				P	20	18	N/A		U-L-D	.098		.088	N/A	2.50		2.25	N/A
	Minimum label length:
				Q	28	24	N/A		U-L-D	.137		.118	N/A	3.50		3.00	N/A
	- 0.5" (12.7mm) in Tear, Peel and Rewind Mode
				R	35	31	N/A		U-L-D	.172		.152	N/A	4.38		3.88	N/A
	- 1.0" (25.4mm) in Cutter Mode
				S	40	35	N/A		U-L-D	.196		.172	N/A	5.00		4.38	N/A
• Media thickness (label and liner):
				T	48	42	N/A		U-L-D	.235		.206	N/A	6.00		5.25	N/A
	0.0023" (0.058mm) to 0.010" (0.25mm)
				U	59	53	N/A		U-L-D	.289		.260	N/A	7.38		6.63	N/A
• Maximum media roll size:
				V	80	71	N/A		U-L-D	.392		.348	N/A	10.00		8.88	N/A
	8.0" (203mm) O.D. on a 3" (76mm) I.D. core
			0		Default: 15 x 12				U-L-D	Scalable
• Maximum fan-fold pack size:				*U = Uppercase, L = Lowercase, D = Descenders
	8.0"L (203mm) x 4.5"W (114mm) x 6.2"H (157mm)	Font Matrices for 8 dot/mm (203 DPI) Print heads

•Gap and notch sensing standards:

-Inter-label gap: 2 - 4mm, preferably 3mm

-Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)

-Sensing hole: 0.125" (3mm) diameter

*Note: Notch & Hole Position centered from 0.25” to 2.25” from media inner edge

•Black mark sensing standards:

- Black mark length (parallel to inside media edge): 0.098" - 0.453" (2.5mm - 11.5mm)

- Black mark width (perpendicular to inside media edge): > 0.37" (> 9.5mm)

- Black mark location: within 0.040"(1mm) of inside media edge

- Black mark density: > 1.0 Optical Density Units (ODU)

- Maximum media density: 0.5 ODU

Specifications Subject to Change without Notice		Technical Specifications
Product Guide - EMEA	27	May 2007