Zebra Technologies ZM400, ZM600 manual Printing Specifications, Font Matrix Type Character Size

ZM400/ZM600

Printing Specifications

•203 dpi resolution (8 dots/mm) - Dot size (W x L):

0.0049" x 0.0049" (0.125mm x 0.125mm)

•300 dpi resolution (12 dots/mm) - Dot size (W x L):

0.0033" x 0.0039" (0.084mm x 0.099mm)

•First dot location measured from inside media backing edge: 0.10" ±.04" (2.5mm ± 1mm)

•Maximum print width: 6.6" (168mm)

•Maximum continuous media print length:

203 dpi	300 dpi
102"	45”
2590mm	1143mm

•Media registration tolerance:

-Vertical = < ±0.039" (±1.0mm) on non-continuous media - --

-Horizontal = < ±0.039" (±1.0mm) within a roll of media

•Programmable print speeds:

-203 dpi = 2.4" (61mm), 3” (76mm) through 10" (254mm) per second in 1" increments

-300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm) per second in 1" increments

Media Specifications

•Maximum non-continuous label length: 39" (991mm)

•Media type: continuous, die-cut, tags, black-mark

•Media web width (label and liner):

2.0" (51mm) to 7.0" (178mm) Tear / Cutter 2.0” (51mm) to 6.75” (171mm) Peel / Rewind

•Minimum label length:

-0.5" (12.7mm) in Tear, Peel and Rewind Mode

-1.0" (25.4mm) in Cutter Mode

•Media thickness (label and liner): 0.0023" (0.058mm) to 0.010" (0.25mm)

•Maximum media roll size:

8.0" (203mm) O.D. on a 3" (76mm) I.D. core

•Maximum fan-fold pack size:

8.0"L (203mm) x 7.0"W (178mm) x 6.2"H (157mm)

•Gap and notch sensing standards:

-Inter-label gap: 2 - 4mm, preferably 3mm

-Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)

-Sensing hole: 0.125" (3mm) diameter

*Note: Notch & Hole Position centered from 0.15” to 3.5” from media inner edge

•Black mark sensing standards:

- Black mark length (parallel to inside media edge): 0.098" - 0.453" (2.5mm - 11.5mm)

- Black mark width (perpendicular to inside media edge): > 0.37" (> 9.5mm)

- Black mark location: within 0.040" (1mm) of inside media edge

- Black mark density: > 1.0 Optical Density Units (ODU)

- Maximum media density: 0.5 ODU

Ribbon Specifications

•Ribbon width: 2.00" (51mm) to 6.85" (174mm)

•Standard Lengths: 984' (300m) or 1476' (450m)

•Maximum ribbon roll size:

3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core

•Ribbon wound ink-side out.

Standard Printer Fonts

Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times, height and width independently. However, fonts E and H (OCR-A and OCR-B) are not considered “in-spec" when expanded. The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory.

IBM Code Page 850 international character sets are available in the fonts A, B, C, D, E, F, G, and 0 through software control.

Font		Matrix		Type*			Character Size
						Inches			Millimeters
	Height	Width	Inter-character Gap		Height	Width	Char/inch	Height		Width	Char/mm
A	9	5	1	U-L-D	0.044	0.029	34.0	1.13		0.75	1.33
B	11	7	2	U	0.054	0.044	22.7	1.38		1.13	0.89
C,D	18	10	2	U-L-D	0.088	0.059	17.0	2.25		1.50	0.67
E	28	15	5	OCR-B	0.137	0.098	10.2	3.50		2.50	0.40
F	26	13	3	U-L-D	0.127	0.078	12.8	3.25		2.00	0.50
G	60	40	8	U-L-D	0.294	0.235	4.3	7.50		6.00	0.17
H	21	13	6	OCR-A	0.103	0.093	10.7	2.63		2.38	0.42
GS	24	24	2	SYMBOL	0.118	0.127	7.8	3.00		3.25	0.31
P	20	18	N/A	U-L-D	.098	.088	N/A	2.50		2.25	N/A
Q	28	24	N/A	U-L-D	.137	.118	N/A	3.50		3.00	N/A
R	35	31	N/A	U-L-D	.172	.152	N/A	4.38		3.88	N/A
S	40	35	N/A	U-L-D	.196	.172	N/A	5.00		4.38	N/A
T	48	42	N/A	U-L-D	.235	.206	N/A	6.00		5.25	N/A
U	59	53	N/A	U-L-D	.289	.260	N/A	7.38		6.63	N/A
V	80	71	N/A	U-L-D	.392	.348	N/A	10.00		8.88	N/A
0	Default: 15 x 12			U-L-D	Scalable

*U = Uppercase, L = Lowercase, D = Descenders

Font Matrices for 8 dot/mm (203 DPI) Print heads

Specifications Subject to Change without Notice		Technical Specifications
Product Guide - EMEA	31	May 2007