Sharp XL-MP130 operation manual Specifications, Amplifier, Speaker

XL-MP110E

Specifications

References

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification fig- ures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source	AC 230 - 240 V, 50 Hz
Power	100 W
consumption
Dimensions	Width: 185 mm (7-1/4")
	Height: 260 mm (10-1/4")
	Depth: 307 mm (12")
Weight	6.1 kg (13.4 lbs.)

Amplifier

Output power	MPO: 182 W (91 W + 91 W) (10 % T.H.D.)
	RMS: 100 W (50 W + 50 W) (10 % T.H.D.)
	RMS: 76 W (38 W + 38 W) (0.9 % T.H.D.)
Output terminals	Speakers: 6 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)
	Subwoofer pre-out (audio signal):
	200 mV/10 k ohms at 70 Hz
Input terminals	Video/Auxiliary (audio signal):
	500 mV/47 k ohms

CD player

Type	5-disc multi-play compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser
	pickup
D/A converter	1-bit D/A converter

Frequency	20 - 20,000 Hz
response
Dynamic range	90 dB (1 kHz)

Tuner

Frequency range	FM: 87.50 - 108.00 MHz
	AM: 522 - 1,620 kHz

Cassette deck

Frequency	50 - 14,000 Hz (normal tape)
response
Signal/noise ratio	50 dB (recording/playback)
Wow and flutter	0.3 % (WRMS)

Speaker

Type	2-way type speaker system
	5 cm (2") tweeter
	13 cm (5-1/8") woofer
Maximum input	100 W
power
Rated input power	50 W
Impedance	6 ohms
Dimensions	Width: 185 mm (7-1/4")
	Height: 260 mm (10-1/4")
	Depth: 205 mm (8-1/16")
Weight	2.4 kg (5.3 lbs.)/each

36