Sharp XL-MP130 Sleep operation, To use timer and sleep operation together, Advanced Features

XL-MP110E

Timer and sleep operation (continued)

Advanced Features

30

Sleep operation

The radio, compact disc and cassette tape can all be turned off au- tomatically.

1Play back the desired sound source.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the

or button to select "SLEEP", and press the MEMO- RY/SET button.

4Press the or button to select the time. (Maximum: 3 hours - Minimum: 1 minute)

3 hours - 5 minutes 5-minute intervals 5 minutes - 1 minute 1-minute intervals

5Press the MEMORY/SET but- ton.

"SLEEP" will appear.

6The unit will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op- eration finishes.

To confirm the remaining sleep time:

1Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select

"SLEEP X : XX".

"X : XX" is sleep remaining time.

The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time whilst it is displayed by pressing the MEMORY/SET button (steps 4 - 5).

To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.

To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select "SLEEP OFF", and press the MEMORY/SET button.

To use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up to CD in the next morning.

Sleep and timer recording:

For example, you can fall asleep listening to the CD and record radio programmes whilst sleeping.

1Set the sleep time (see left, steps 1 - 5).

2Whilst the sleep timer is set, set the timer playback or recording (steps 2 - 10, pages 27 - 28).

	Timer playback or
Sleep timer setting recording setting			End time
	1 minute - 3 hours		Desired time
	Sleep operation will	Timer playback or recording
	automatically stop.	start time

Caution:

When using the cassette deck, be sure the tape length is long enough to perform both functions. If you want to sleep and wake up listening to a tape, and the length of the tape is shorter than the sleep timer setting, timer playback or recording will not be possible.