Enhancing your system
The connection lead is not included. Purchase a commercially avail- able lead as shown below.
VCR, DVD, etc.
Listening to the playback sounds from VCR, DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the |
VIDEO/AUX IN sockets. |
When using video equipment, connect the audio output to this |
ANTENNA AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT LEFT
Red WhiteRATED SPEAKER6 OHMS MIN.IMPEDANCE:
AC INPUT | SPEAKERS |
|
|
| RIGHT | LEFT | SUBWOOFER |
|
To the line output sockets
White 
Red
RCA lead (not supplied)
| unit and the video output to a television. |
2 | Press the |
3 | Press the VIDEO/AUX button. |
4 | Play the connected equipment. |
Note:
To prevent noise interference, place the unit away from the televi- sion.
To record on a tape
1Insert a cassette in the cassette compartment.
2Press the VIDEO/AUX button.
3Press the 
button.
4Press the 
/ 
(
) button.
5Play the VCR, DVD, etc.
Headphones
Advanced Features
Auto power on function:
When you press any of the following buttons, the unit turns on. VIDEO/AUX button (main unit and remote control): The unit turns on and the "VIDEO" function is activated.
/ 
button on the main unit: The unit turns on and playback of the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Before plugging in or unplugging the headphones, reduce the vol- ume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and impedance between 16 and 50 ohms. The recommended imped- ance is 32 ohms.
Plugging in the headphones disconnects the speakers automati- cally. Adjust the volume using the VOLUME control.
31
